What Wayne Bolt & Nut makes

Wayne Bolt & Nut Co. is a fastener manufacturer and master distributor in Livonia, Michigan. The company both stocks and makes standard and specialty fasteners, and describes itself as a one-stop shop with more than 50,000 items in stock. Its catalog runs across hex head cap screws, slotted and flat head cap screws, square-head machine bolts, forged eye bolts and eye rods, left-hand bolts, long and large bolts, shoulder screws, thumb screws, square-head set screws, wood and sheet metal screws, hex finished nuts, flat washers, and lockwashers. The company notes it keeps the largest stock of unlisted sizes in the area and reworks stock items in any quantity.

On the manufacturing side, Wayne Bolt runs cold heading and hot heading from 1/4 inch to 1-1/2 inch diameter in a range of head styles, including hex, countersunk, square, tee, and carriage. It rolls thread from #10 through 3/4 inch, cuts thread up to 1-1/2 inch diameter, and performs in-house knurling, coining, and stamping. The plant also does deep-hole drilling and tapping for grease fittings, drilling up to 6 inches for through-hole bolts, and drilling for lockwire and cotter pins. The company states it runs no minimums, quoting anything from a single piece to a million, and that all material is gauged and certified before it leaves the plant. That combination of stock breadth and made-to-print capability is the reason a buyer would use a shop like this for tier-two and tier-three fastener supply.

Ownership and history

Henry Wojcik and Ray Clacys founded Wayne Bolt & Nut Co. in 1959. It began as a small fastener distributor and expanded into manufacturing, and it remains an independent, closely held firm now run by the third generation of the Wojcik family. Trade directories list Michael J. Wojcik among the company's owners and principals. The company frames its vision in three words that appear across its own materials, quality, price, and delivery, and it operates from a single facility at 13085 Fairlane in Livonia, in the Detroit metropolitan fastener cluster. Older directory entries still carry a former Detroit address on Livernois Avenue, which the Livonia location has superseded. A related brand, Giant Bolt & Fastener, appears alongside the Wayne Bolt name on the company's quality certificate.

Certifications and quality

Wayne Bolt describes itself as an ISO-9000 company and says it meets automotive, aerospace, military, and construction standards. The certificate the company posts on its own site is an ISO 9001:2008 registration issued through SAI Global (QMI-SAI Canada, ANAB accredited), certificate number CERT-0078734. Its scope covers the manufacturing, distribution, and warehousing of cold and hot headed fasteners, wire specialties, and screw machine products. That certificate carries an original certification date of August 2005, a current certification date of August 2014, and an expiry of August 2017, and ISO 9001:2008 has since been superseded by ISO 9001:2015. A buyer running supplier qualification should confirm the current certificate status directly with the company. Wayne Bolt also references government-related quality controls on its site, citing Mil Standard 45208A, Mil Standard 1222H, and lot traceability, all self-stated. For OEM and defense work, current, third-party-verified certifications are the gating item, so this is the field to verify before award.

Known customers

Wayne Bolt does not name customers on the public record. The company states that it serves automotive, aerospace, military, and construction buyers, which is consistent with a Detroit-area fastener manufacturer and master distributor, but no specific named program or filing documents an individual customer. For buyers weighing this shop, the useful facts are the ones the company does publish: its in-house heading and screw-machine capacity, its no-minimum policy, and its stated lot certification, rather than a customer list it keeps private.

Sourcing evidence

No US customs bill-of-lading record was found for Wayne Bolt & Nut Co. under its known names. That absence is consistent with a domestic manufacturer and master distributor that sources fastener stock and raw material largely within the United States rather than importing directly by sea. Because there is no import record to read, this profile omits the customs activity, origin, and supplier-network figures that appear on directly importing suppliers. Absence of a customs record is not evidence of inactivity; it reflects a domestic sourcing pattern and the limits of ocean-freight manifest data, which does not capture truck, rail, or domestic movements. Buyers focused on domestic content and nearshoring may find that pattern useful in itself.

Frequently asked questions

What does Wayne Bolt & Nut make?

Wayne Bolt & Nut manufactures and distributes fasteners: hex head cap screws, machine bolts, forged eye bolts, set screws, nuts, washers, and specialty and made-to-print bolts. It runs cold and hot heading from 1/4 to 1-1/2 inch diameter, screw machining, CNC milling and turning, thread rolling and cutting, and deep-hole drilling, and it stocks more than 50,000 items as a master distributor.

Who owns Wayne Bolt & Nut?

Wayne Bolt & Nut is an independent, closely held company founded in 1959 by Henry Wojcik and Ray Clacys. It is run by the third generation of the Wojcik family, and trade directories list Michael J. Wojcik among its owners and principals.

Where is Wayne Bolt & Nut located?

Wayne Bolt & Nut operates from a single facility at 13085 Fairlane, Livonia, Michigan 48150, in the Detroit metropolitan area. An older Detroit address on Livernois Avenue still appears in some directories and is out of date.

What certifications does Wayne Bolt & Nut hold?

Wayne Bolt describes itself as an ISO-9000 company. The certificate posted on its site is an ISO 9001:2008 registration (SAI Global, CERT-0078734) covering the manufacturing, distribution, and warehousing of cold and hot headed fasteners, wire specialties, and screw machine products, with an expiry date of August 2017. Because ISO 9001:2008 has been superseded by ISO 9001:2015, buyers should confirm the current certificate status with the company.

Who are Wayne Bolt & Nut's customers?

Wayne Bolt does not publish a customer list. It states that it serves automotive, aerospace, military, and construction buyers, and its capabilities, in-house heading, screw machining, and lot certification, point to a supplier used for standard and specialty fastener supply rather than a single named program.

Last verified September 28, 2026. Is this your company? Request a correction.