Aerospace and Space Hardware Sourcing Software: A Buyer's Guide

Aerospace and space buyers need sourcing software that holds the drawing on the item, limits which approved shops see which parts, and keeps quote history across a program that can run twenty years. LightSource covers buy-to-print RFQs, cost breakdowns and quote history, and supports ITAR-controlled programs with GovCloud by request; it does not enforce approved suppliers per part or track FAIR status. This guide covers what to check, how an RFQ runs and which vendors to test.

Who this guide is for

This guide is for sourcing managers, supplier quality engineers, program managers and procurement leaders at companies that buy parts built to their own drawings: commercial aerospace OEMs and tier 1 and tier 2 suppliers, aerostructures and engine component makers, space launch and satellite hardware companies, avionics makers, eVTOL and advanced air mobility developers, and the IT owners and COOs who have to connect a sourcing tool to the rest of the plant. MRO teams buying aircraft parts against live availability need aviation-specific parts marketplaces instead.

For a ranked list with scores, see the companion ranked guide to sourcing software for aerospace manufacturers. This page adds a compliance checklist, an RFQ walkthrough and tests for quote history and controlled drawings. For the wider category, see the flagship comparison. LightSource wrote this guide and is one of the options in it, so each LightSource limit is stated where the capability is described.

What is different here

Six conditions separate aerospace sourcing from generic manufacturing, stated here as buyers put them, in italics.

Low volume, long lead, buy-to-print

Our volumes are low, the parts are complex, and a single forging can have a 50-week lead time. BCG's 2024 analysis of aerospace casting and forging put titanium lead times at about nine months and the full manufacturing process at 6 to 18-plus months, and recommended that OEMs and tier 1s consider contracts of at least 10 years. A tool has to hold the drawing and revision on the item and require lead time on every quote.

Only approved suppliers can quote

Adding a supplier means an audit and months, so only approved shops get the RFQ. Approval is by process and by part, not by company. Hackett's supplier management guide says qualification is assigned "more often than not, at a supplier's company level" in average tools. See supplier qualification and the approved vendor list.

Every award needs paperwork

Every award needs a FAIR, special process approvals and material certs before we can accept the part. AS9102 first article inspection, Nadcap-accredited special processes and mill certificates sit mostly in the quality system. Hackett's direct sourcing guide counts post-award material qualification (it names PPAP/APQP and sample test reports) as in scope for direct sourcing tools; LightSource documents no such tracking. See first article inspection.

Some drawings are controlled

Some parts are ITAR-controlled, so drawings cannot go into a system that cannot restrict who sees them. The tool must show who can open what before the RFQ goes out. See ITAR and the post on what every procurement leader needs to know about ITAR.

Alloys are allocated and index-priced

Titanium and nickel alloy are allocated, priced off an index, and we often buy mill product for our suppliers. The tool has to price from a material index and carry the buyer's material next to the supplier's conversion cost. See index-based pricing.

Programs run twenty years

We re-quote the same part number across decades and need the history. A tool has to keep every revision and every quote tied to the part number, so the next RFQ starts from the last contract instead of a blank sheet. See long-term agreements.

Compliance checklist

Certifying a part, a process or an export is the buyer's job. The tool's job is to keep the evidence and to keep the wrong people out.

  • AS9100. Put the certificate on the supplier record before invitation. LightSource RFIs accept file submissions, and Data Rooms read start and expiration dates from recognized documents such as certifications and show expired dates in red. There is no documented expiry alert or approval status per part.

  • AS9102 first article inspection. Track FAIR status per part and supplier after award. LightSource does not track this; keep FAIR status in your quality system, and use the item contract as the record of what was awarded.

  • Nadcap special processes. Know which shop is accredited for which process before the RFQ goes out. Nadcap is an industry-managed accreditation program for aviation, defense and space sectors, run through the Performance Review Institute. LightSource can collect the accreditation through an RFI question and hold it as a supplier tag or custom property; it does not gate an RFQ by process or part.

  • ITAR and EAR. Restrict who can open technical data and host where required. See the controlled technical data section below.

  • DFARS specialty metals. Country of melt can be a required quote field.

  • FAA Part 21 and PMA. Keep the approved design data with the item; LightSource items carry files, specs and revisions.

  • Counterfeit parts avoidance (AS5553, AS6174). Ask for an attestation per quote. LightSource can require an attestation field or file in the quote format; it has no counterfeit screening feature.

  • REACH and conflict minerals. Capture chromate processes in the item spec and collect the CMRT through an RFI file question. There is no substance database.

Evaluation criteria

Ten criteria a buyer can test in a demo; adjust the weights to your plant. Strong means documented in the standard product, Partial means it needs configuration or has a limit, and Gap means not documented.

Criterion

Weight

LightSource fit

Drawing-driven buy-to-print RFQ

High

Strong

Cost breakdown on machined parts

High

Strong

Approved supplier gating per part

High

Gap

Nadcap and AS9100 collection

Medium

Partial

FAIR and certificate tracking

High

Gap

Controlled technical data

High

Partial

Twenty-year quote history

High

Partial

Long-lead and indexed alloys

Medium

Partial

SAP and PLM fit

Medium

Partial

Supplier onboarding

Medium

Strong

  • Buy-to-print RFQ (Strong). Items hold files, specs and revisions, and a project starts from items or a BOM. Item Ingestion reads PDF drawings, images and spreadsheets and proposes items for approval; it does not read CAD files.

  • Cost breakdown (Strong). Full Breakdown has separate tables for raw materials, purchased items, machine and assembly processes, packaging, logistics and markups.

  • Approved supplier gating (Gap). The buyer chooses which suppliers see which items, but the tool does not check that a supplier is approved for a part. Part-scoped approval is not documented. Hackett credits JAGGAER with granular qualifications, so it is the nearest alternative to test.

  • Nadcap and AS9100 collection (Partial). RFIs with file submission and Data Rooms collect the evidence; nothing enforces it.

  • FAIR and certificate tracking (Gap). Not documented.

  • Controlled technical data (Partial). ITAR-controlled programs are supported and GovCloud is available by request; access restriction is per record and does not separate viewing from editing.

  • Quote history (Partial). The features are documented: versioned RFQs, Pricing History, Item Cost Walk and previous contracts as baselines. History starts when the data enters LightSource, and the company has no multi-decade track record.

  • Long-lead and indexed alloys (Partial). Lead time is a quote input. Index pricing is configured with formulas and freight and tariff modifiers; there is no live index feed and no allocation tracking.

  • SAP and PLM fit (Partial). Excel Item Sync, a GraphQL API and contract exports. There are no prebuilt connectors.

  • Supplier onboarding (Strong). Suppliers use LightSource free and create an account from the invitation. Supplier Discovery searches a database of more than 100,000 suppliers by company name, process or material.

How an RFQ runs

Use this flow as a demo script with any tool; the steps describe LightSource.

  1. Put the drawing on the item. Attach the PDF drawing and spec, and record material, process, finish and drawing revision as properties. A change after the item has been shared saves a new revision.

  2. Qualify new shops with an RFI. Ask for the AS9100 certificate, Nadcap scope and a signed NDA, then score answers against knockout criteria set in advance. See request for information.

  3. Build the project. Create it from the items or a BOM, enter volumes per year, and set the baseline from the last contract.

  4. Choose the quote format. Use Full Breakdown for machined and forged parts, mark lead time required, and add formulas that read item properties such as material for index-linked pricing.

  5. Invite only approved shops. In the Items tab, set Supplier visibility on each item so that only the suppliers you choose see it.

  6. Run rounds and handle changes. A new drawing revision reaches suppliers only when you send a new RFQ, and you review previous and current values before sending. Every RFQ version is preserved.

  7. Compare and award. Compare line by line, model scenarios (splits, a second source) and route the award through up to 20 approvers. Each awarded item becomes an item contract, not a purchase order.

  8. Hand off. Export contracts to Excel, CSV or JSON for the ERP, and record the FAIR in the quality system.

Twenty-year quote history

In LightSource each item keeps its revisions, which can be compared side by side. Each awarded item has a contract page with Pricing History (earlier contracts, by issue date), an Item Cost Walk of how its price changed, and Sibling Contracts.

Three limits matter for a program that outlasts any vendor. History begins when the data is in LightSource, and no import of earlier contracts is documented. Also, the company came out of stealth in 2025, so ask for export and retention terms in writing; contracts export to Excel, CSV and JSON.

Mill product and long-lead metal

When you buy titanium or nickel mill product for your suppliers, model it as its own item, quoted by the mill or distributor, and list the same item as a raw-materials line in the BOM of the finished part. A project can hold both the material item and the part item, so cost roll-up shows the material you furnish next to the supplier's conversion cost. LightSource documents no consignment, inventory, MRP or allocation tracking, and it does not follow a mill order.

For long-lead parts, LightSource supports multi-round bidding, award scenarios and a contract record. A lead time in a quote is only as good as the supplier's capacity, which no tool verifies.

Controlled technical data

LightSource supports ITAR-controlled sourcing programs and has defense customers, which it does not name. Deployment on AWS GovCloud is available by request. For CUI, buyers either upload BOMs and parts directly for controlled sharing with selected suppliers, or put a link to their own secure FTP server in the part metadata, so controlled files never leave their environment. Projects, items and RFI events can be restricted to access groups, and the buyer chooses which item properties suppliers see.

The limits: restriction applies per record and does not separate viewing from editing, Data Rooms have no per-file permissions, and part-scoped supplier permissions are not documented. Export classification and release decisions stay with the buyer and its export counsel. The company holds a SOC 2 Type 2 attestation and offers SAML single sign-on; admins can require MFA for email-and-password sign-ins. See the security page.

Test it with a synthetic drawing sent to an authorized and an unauthorized shop.

Vendors to consider

The ranked guide scores ten options; group them by the job. Head-to-head pages are in the comparison library.

  • LightSource. The AI-native direct materials operating system, spec through scale, PLM through ERP. It supports direct and strategic indirect sourcing and is not built for tactical indirect buying (three bids and a buy). It does not issue purchase orders or invoices. The Hackett Group's direct sourcing guide lists it as an "AI-native sourcing platform purpose-built for direct materials procurement"; that is a listing, not a ranking.

  • JAGGAER. Sourcing depth, and Hackett's supplier management guide credits it with granular qualifications; test cross-module data flow. See LightSource vs. JAGGAER.

  • Ivalua. An organically built, configurable suite; some manufacturers see the direct module as still maturing. See LightSource vs. Ivalua.

  • SAP Ariba and Oracle. The natural tests for plants on SAP or Oracle ERP. See SAP Ariba and Oracle.

  • Coupa, Keelvar and GEP. Coupa is strongest in procure-to-pay and indirect spend; Keelvar targets constrained awards; GEP pairs software with services. See Coupa, Keelvar and GEP.

  • Silkline. A newer tool for lean hardware teams that covers RFQs through purchase orders; its public documentation shows an approved supplier list with status flags. See LightSource vs. Silkline.

  • Excel and email. Universal, with no revision-linked quote history. See LightSource vs. Excel.

Public proof

LightSource serves dozens of companies across the mid-market and the Fortune 500, including aerospace and defense manufacturers; not every customer can be named. The case studies below are from adjacent industries and the figures are the customers' own.

Blue Bird, the school bus maker. In the Blue Bird case study, RFQs per buyer grew from 34.9 to 48.3 (38 percent more with the same team), average sourcing cycle time fell from 16 to 14 days, and 398 supplier companies were onboarded with 99.7 percent activated. What transfers to aerospace is the supplier activation and the move off email; approval and FAIR layers are not part of that story. See also the automotive to aerospace transition guide.

Time Manufacturing (Versalift). The Time Manufacturing case study describes an industrial equipment maker with highly customizable product lines that moved from spreadsheets and email to LightSource for RFQs, reporting more than $5 million in awarded savings to date.

Sources

Frequently asked questions

Which RFQ software fits aerospace tier 1 suppliers quoting buy-to-print forgings and machined parts?

Look for software that holds the drawing on the item and gives every shop the same cost structure. LightSource does this with Item Ingestion from PDF drawings, Full Breakdown quote formats with machine process lines and per-item supplier visibility, though it does not check that a shop is approved for the part.

Is there supplier onboarding software that handles Nadcap special process approval for aerospace?

LightSource collects the evidence: an RFI asks for the AS9100 certificate and Nadcap scope, takes file uploads and a signed NDA, and scores answers; Data Rooms keep the documents and show expiration dates. Approval status per process and per part is not tracked, so it stays in your quality system. Hackett credits JAGGAER with granular qualifications, so test it if you need part-level qualification inside the tool.

Which sourcing tools help a space hardware program track long-lead titanium forgings and the mill product we buy on behalf of our suppliers?

LightSource can quote the mill product as its own item and list it as a raw-materials line in the part's BOM, with required lead time and index-linked pricing through formulas. It does not track allocation, inventory or mill orders, and has no live index feed.

What sourcing platforms do aerospace OEMs use to re-quote the same part number across a 20-year program and keep the full quote history?

LightSource keeps every RFQ version, shows Pricing History and an Item Cost Walk on the contract page, and re-sources a closed project with old prices as the baseline. History starts when your data enters LightSource, and contracts from before can be loaded only through the API.

Which cloud sourcing vendors can restrict which suppliers see which ITAR-controlled drawings on an RFQ, and do any offer GovCloud hosting?

LightSource supports ITAR-controlled sourcing programs, lets the buyer choose which suppliers see which items, offers AWS GovCloud by request, and handles CUI through controlled upload or a link to your own secure FTP server. This guide did not verify other vendors' GovCloud offerings, so ask each for a live test with a synthetic drawing and a written answer on hosting.

How should a 60-person eVTOL startup organize RFQs, FAIRs, material certs and supplier approvals as it moves to conforming parts, and when is it time for software?

As a working rule of thumb (ours, not a sourced benchmark), spreadsheets stop working at the second program, the first FAIR cycle or around 50 suppliers. At that point, put drawings and revisions on items, collect certs through RFIs and Data Rooms, and use Supplier Discovery for new shops. Keep FAIR status and approvals in a quality system, since LightSource does not track them.

Faster sourcing,
lower cost, less chaos.

See how LightSource connects engineering, procurement, and suppliers in one operating system to help you launch faster at lower cost.

DPW Award Winner

SOC 2

Hackett Group 2026 Validated

Kearney #1

Gartner Cool Vendor

Procuretech 100

G2 Top Rated