Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared

LightSource Team

The best sourcing software for aerospace manufacturers depends on the hard problem. LightSource leads for buy-to-print RFQs built from a BOM with controlled drawings, JAGGAER for part-level supplier qualification, Ivalua and SAP Ariba for all-spend suites, and Keelvar for constrained awards. This guide scores seven platforms on eight weighted criteria as of September 29, 2026, with a demo test and the stated gaps for each, including LightSource's own.

Aerospace sourcing is low volume, buy-to-print and approval-gated. A tier 2 shop quoting a forging needs the drawing at the right revision, a supplier that is approved for that process, and a lead time that survives a rate ramp. Most "best procurement software" lists rank suites on breadth and never ask whether a buyer can send a controlled drawing to three approved shops and compare their cost breakdowns line by line. LightSource publishes this guide and ranks its own product first where the criteria support it; the disclosure, the weights and the places where LightSource falls short are stated below.

The Short Answer

The Hackett Group's 2026 guide to direct sourcing tools describes the average tool as building an RFx from a BOM that carries only a part number, a description and a quantity. Aerospace buyers feel that gap sooner than most, because the part number is the smallest piece of what a forging quote depends on. Our verdict by buyer type, as of September 29, 2026:

Buyer

Shortlist

Tier 1 or 2 buying to print

LightSource, then JAGGAER

Space or eVTOL startup

LightSource; spreadsheets until program two

OEM with approval-heavy supply

JAGGAER, then LightSource

Enterprise on SAP

SAP Ariba, then LightSource

Capacity-limited long-lead buys

Keelvar, then JAGGAER

Two rows carry caveats. LightSource does not enforce an approved supplier list per part or track first article inspection (FAI) status, so an OEM whose sourcing system must gate awards on part-level supplier qualification should start with JAGGAER, whose supplier management Hackett credits with granular qualifications. And an enterprise that wants purchase orders, invoices and contracts in one vendor on SAP is better served by SAP Ariba; a direct specialist would sit beside it for the engineering-heavy categories.

How We Scored

We scored each platform, including our own, on eight criteria. The weights reflect where aerospace sourcing time goes: getting the drawing and BOM into a quote, getting comparable cost structures back, and controlling who sees what.

Criterion

Weight

Test

BOM and drawings

20%

RFQ built from a spec-aware item with files

Cost breakdown

15%

Every supplier fills the same structure

Controlled data

15%

Per-supplier access to technical data

Qualification

15%

Approval status per supplier and part

Award optimization

10%

Constraints, splits, backup awards

Revisions and history

10%

Re-quote a change, keep years of quotes

ERP and quality fit

10%

Documented path to ERP and PLM

Pricing model

5%

Stated model, no surprise supplier fees

The categories follow how The Hackett Group defines direct sourcing in its Sourcing (for direct) Solutions guide: BoM management integrated with PLM and ERP, cost analysis, NPI collaboration and predictive cost analytics. We add three aerospace criteria that Hackett treats elsewhere: part-level supplier qualification, which its Supplier Management Solutions guide says average tools assign "more often than not, at a supplier's company level"; optimization with constraints, where its optimization guide separates a true mixed-integer solver from home-grown rounding; and controlled data, which Hackett does not cover and which we weight because export-control mistakes carry penalties.

Ratings use our comparison library vocabulary: Native (documented and in the standard product), Configured (available through per-customer setup or integration), Marketed (claimed or listed without public evidence of the workflow) and Not documented (we could not find it, which is not the same as not offered). Suites often do more than their public documentation shows, so every "Not documented" below is a question for the demo, not a verdict.

The 7 Platforms at a Glance

Platform

Best fit

1. LightSource

Buy-to-print RFQs from a BOM

2. JAGGAER

Part-level supplier qualification

3. Ivalua

Configurable all-spend suite

4. SAP Ariba

SAP-centered enterprises

5. GEP

Software plus managed services

6. Keelvar

Constrained award events

7. Coupa

Indirect and P2P at scale


Rating table of seven sourcing platforms across BOM and drawings, cost breakdown, controlled data, qualification and award optimization
Our ratings of seven platforms on five of the eight aerospace criteria, as of September 29, 2026, based on public documentation, The Hackett Group's September 2026 guides and our own evaluations. "Not documented" means we found no public evidence, not that the capability is absent.

In text, the ratings are: LightSource Native on BOM and drawings and on cost breakdown, Configured on controlled data and award optimization, Not documented on qualification. JAGGAER is Native on qualification and award optimization, Configured on BOM and drawings and cost breakdown, Not documented on controlled data. Ivalua is Configured on BOM and drawings, cost breakdown and award optimization, Not documented on controlled data and qualification. SAP Ariba is Configured on BOM and drawings and cost breakdown, Not documented on the other three. GEP is Native on cost breakdown, Configured on BOM and drawings, Marketed on award optimization, Not documented on controlled data and qualification. Keelvar is Native on award optimization, Not documented on the other four. Coupa is Native on award optimization, Configured on cost breakdown, Not documented on the other three.

The 7 Platforms, Ranked

1. LightSource

What it is: the AI-native direct materials operating system, spec through scale, PLM through ERP. It serves dozens of companies across the mid-market and the Fortune 500, including aerospace manufacturers; not every customer can be named. The Hackett Group lists LightSource in its direct sourcing guide as an "AI-native sourcing platform purpose-built for direct materials procurement."

Best for: tier 1 and tier 2 aerospace manufacturers, space hardware and eVTOL companies that quote buy-to-print parts and want RFQs, cost breakdowns and quote history out of Excel and email without replacing the ERP or PLM.

Strengths. Items are master data with specs, custom properties, revisions and files such as drawings and spec sheets, and a sourcing project can launch from a BOM or a batch of items. Quotes come back in a structure the buyer chooses; the Full Breakdown template has separate tables for raw materials, purchased items, machine and assembly processes, packaging, logistics and markups, which suits machined and forged parts. Item Ingestion reads PDF, Excel and image files, including PDF drawings, to create or update items (it does not read CAD files). Line-item supplier filtering controls which suppliers see which items, every RFQ version is preserved when engineering resends a change, and the contract page carries Pricing History and an Item Cost Walk, which matters when the same part number is quoted again years later. For controlled work, LightSource supports ITAR-controlled sourcing programs and has defense customers, which it does not name; buyers either upload BOMs and parts for controlled sharing with selected suppliers or put a link to their own secure FTP server in the part metadata, so controlled files stay in their environment. Within the buyer's team, projects, items and RFI events can be restricted to access groups; toward suppliers, the buyer chooses which suppliers see which items and which item properties they see. Deployment on AWS GovCloud is available by request. Suppliers use LightSource free, and Supplier Discovery searches a network of more than 100,000 suppliers by company name, process or material. LightSource holds a SOC 2 Type 2 attestation and does not train foundation models on customer RFQ or contract data.

Limits. LightSource has aerospace customers, whom this guide does not name. LightSource does not enforce an approved supplier list per part or track FAI status, and it does not feed titanium and nickel index prices, and it has no allocation tracking, no PPAP or APQP workflow and no capacity-constrained award. Suppliers' certificates can be collected through RFIs and Data Rooms, where document analysis reads expiration dates and shows expired files in red, but approval status per part stays in the quality system. Access-group restrictions apply inside the buyer's team and do not separate viewing from editing, Data Rooms have no per-file permissions, and the response deadline does not lock the RFQ, so late quotes are accepted until the buyer closes the project. Awards create item contracts, not purchase orders, and LightSource does not do purchase orders, invoicing, indirect spend, reverse auctions or contract lifecycle management. Integration runs through Excel Item Sync and a GraphQL API rather than certified prebuilt connectors. LightSource does not claim ITAR registration of its own, FedRAMP authorization, CMMC certification or DFARS 7012 attestations. The company came out of stealth in 2025.

Demo test: put a synthetic controlled item in one RFQ project sent to an approved supplier and an unapproved one, and show what each supplier can open. Then revise the drawing mid-RFQ, keep the Rev B bid for earlier aircraft and ask the buyer which aircraft can still use it and what stops it from becoming the Rev C order.

Pricing model: platform fee plus seats, implementation included; suppliers pay nothing.

Recognition: Gartner Cool Vendor in Sourcing and Procurement Technology, 2025; The Hackett Group 50 to Watch, 2025-2026, listed on Hackett's recognition page; and a new vendor in the Sourcing and Direct Sourcing categories of the Spend Matters Fall 2025 SolutionMap. Index-linked pricing rates Configured: the formula editor references item properties and post-bid modifiers handle freight and tariffs, with no live index feed. See LightSource vs. JAGGAER.

2. JAGGAER

Best for: large manufacturers that want sourcing and supplier governance in one suite and need qualification recorded at a finer grain than the supplier.

Strengths. The Hackett Group credits JAGGAER with "sophisticated direct materials sourcing capabilities" and, in its supplier management guide, with granular qualifications and supply quality management, the nearest public evidence to the part-level approval aerospace buyers ask for. Its optimization engine traces to the 2013 CombineNet acquisition.

Limits. Hackett also describes the suite as built through multiple acquisitions, so buyers should test how item, supplier and contract data move between modules. A recurring complaint among reviewers is rigidity, and in our assessment BOM import sits on an enterprise S2P rollout rather than starting from AI ingestion of drawings and spreadsheets.

Demo test: record a supplier's approval for one process on one part number and show who is blocked from awarding a different part to that supplier. Then withdraw approval for a heat-treat subcontractor after the commercial award and show what purchasing sees for each affected part.

Pricing model: custom-quoted subscription by module; ask for implementation and supplier-side fees in writing.

Direct depth: Module, and the deepest of the suites. See LightSource vs. JAGGAER.

3. Ivalua

Best for: regulated enterprises that want a deeply configurable suite and will invest in configuration and a strong implementation partner.

Strengths. Hackett calls Ivalua a "natively integrated, intuitive and flexible suite" with capabilities for all spend, including direct materials, and it is organically built on one codebase, unlike the acquisition-assembled suites.

Limits. Buyers report that getting value from Ivalua takes data-model expertise, that partner choice matters, and that some manufacturers see the direct module and its integrations as still maturing. Hackett's supplier management entry for Ivalua does not mention part-level qualification. In our evaluations, BOM sync is set up per customer rather than extracted from files.

Demo test: ask for a tooling-life field and an effectivity range on a part, sent to suppliers and shown to the award approver, and record which steps needed the partner.

Pricing model: custom-quoted subscription; ask what implementation and the implementation partner add.

Direct depth: Module. See LightSource vs. Ivalua.

4. SAP Ariba

Best for: enterprises standardized on SAP that want one vendor for every spend type and accept a partner-led rollout.

Strengths. Hackett, a paid SAP Ariba partner (see the disclosure below), calls it a "leading S2P suite platform" with broad capabilities across spend types and a newer category management module, and the integration with SAP ERP means material masters and awards stay in one landscape.

Limits. Hackett's direct guide entry names generic functional blocks and no direct-specific capability. In our evaluations, as of September 29, 2026, sourcing events reference ERP material master rows rather than drawings, properties and revisions, and detailed cost breakdowns usually travel as an Excel attachment. A recurring minority complaint among reviewers is a dated interface that needs training for occasional users, and rollouts are partner-led, so ask who owns the outcome.

Demo test: carry a drawing, a revision and a four-level BOM into an RFQ in the version your plants would receive.

Pricing model: quote-based module subscriptions plus integrator implementation; ask about supplier-side transaction fees.

Direct depth: Module. See LightSource vs. SAP Ariba.

5. GEP

Best for: enterprises that want software and managed procurement services from one provider.

Strengths. Hackett's guides describe a natively integrated suite covering sourcing, cost and should-cost modeling and sourcing execution, usable for indirect and direct spend, with market and category intelligence and BPO services alongside. GEP is the one suite here with a credited should-cost module; LightSource has no should-cost engine, and buyers upload should-costs to an item.

Limits. Implementation and operation often come bundled with GEP services, so ask what the software does without an analyst at the keyboard, and reviewers report that the newest capabilities live on its QUANTUM platform, so existing SMART customers face a migration. Public documentation of aerospace workflows is thin.

Demo test: have GEP repeat its should-cost exercise on a machined bracket without a services analyst operating the screen.

Pricing model: custom quote-based enterprise subscription, often alongside services.

Direct depth: Module. See LightSource vs. GEP.

6. Keelvar

Best for: large tender events, including capacity-limited long-lead buys, where award optimization is the main problem.

Strengths. Hackett lists Keelvar for "AI-powered sourcing automation and optimization capabilities," and the optimization guide separates top tools that use a true mixed-integer solver and can auto-relax blocking constraints from average tools limited to predefined capacity and allocation rules. For allocating a forging across approved sources under capacity ceilings, that is the relevant skill.

Limits. Hackett describes Keelvar as optimization and automation rather than BOM or cost-breakdown management, and in our evaluations it is an optimization engine for large events rather than an item or BOM system of record, so drawings, revisions and part history live elsewhere.

Demo test: give two bidders the same sub-tier forge, remove one press for a quarter and ask the tool to name the first infeasible month.

Pricing model: quote-based enterprise subscription; buyers report event-based tiers, so ask what an event is.

Direct depth: None documented as a system of record. See LightSource vs. Keelvar.

7. Coupa

Best for: companies running indirect spend and procure-to-pay at scale that want broad spend visibility.

Strengths. Coupa is the broadest P2P and indirect suite on this list, and Hackett credits a user-friendly interface, automated sourcing and one of the leading optimization tools, acquired with Trade Extensions in 2017 (Hackett is a paid Coupa partner; see the disclosure below).

Limits. P2P and indirect are Coupa's center of gravity, some manufacturing buyers report gaps bringing direct spend onto the platform, and Hackett's direct guide entry names no direct-specific capability. Coupa sells one configurable product, so a BOM-driven RFQ with a custom cost breakdown must fit the standard event model. Coupa has grown by acquisition in optimization, risk and contracts, so test how those modules share data.

Pricing model: custom quote by module; integrator-led rollout is common, so ask what sits outside the license.

Demo test: build one BOM-driven RFQ with a custom cost breakdown that includes machine process and cycle time, and note whether it fits the standard event or needs an Excel attachment.

Direct depth: None under this guide's BOM-module definition, although Coupa can buy direct spend. See LightSource vs. Coupa.

What Makes Aerospace Different

Direct materials here are parts with a drawing, a revision, a material, a process and an approval history, so a quote is only comparable if it prices the same revision from a supplier approved for that work. Our colleague Mason Morgan wrote about getting bill of materials data into shape before sourcing, and the same discipline applies to a bill of materials four levels deep with shared parts.

The constraint is often physical. BCG's 2024 analysis of aerospace casting and forging reported titanium lead times of about nine months, 70 to 80 weeks (roughly 16 to 18 months) for one high-demand steel alloy from a single supplier, and a manufacturing cycle of 6 to 18-plus months. BCG's recommendation was commitment: volume commitments earlier in a contract, contracts of at least 10 years against the five to seven most carry today, and investment in capacity. The pressure shows up in the 2026 data as well. IATA put the global aircraft order backlog at 18,100 in May 2026, and Roland Berger's survey of 95 European aerospace companies found 55 percent still facing relevant supply chain disruptions and about 80 percent expecting constraints on critical raw materials such as special alloys. The U.S. Geological Survey reported that the United States produced no titanium sponge in 2025 and imported an estimated 44,000 metric tons, a record, with Japan supplying 73 percent through July 2025.


Chart of aerospace sourcing pressure: titanium lead time about 9 months, steel alloy 16 to 18 months, full cycle 6 to 18 plus months, beside a backlog of 18,100 aircraft, 55 percent of surveyed European aerospace companies facing disruption and 44,000 tons of titanium sponge imported
Long-lead metal and a record backlog meet in the same RFQ: lead times from BCG (July 2024), backlog from IATA (June 2026), company disruption and raw material expectations from Roland Berger (June 2026), titanium sponge imports from USGS (2026). The sources use different populations and periods.

The Shared Forge Test

Give every vendor the same fictional fitting. Two approved machine shops each offer 30 fittings a month, and both buy one blank per fitting from the same forge. The forge commits 60 blanks a month to the program, 8 of them reserved for spares, which leaves 52. Each shipset needs two fittings, and a revised blank introduced in March cannot be built early, so January and February surplus cannot be banked.

Plan

Jan

Feb

Mar

Shipsets

22

25

28

Fittings needed

44

50

56

Blanks available

52

52

52

Margin

+8

+2

-4

A 50/50 award looks feasible at the machine shops, since each needs 28 fittings against an offer of 30. March is still short four fittings, or two shipsets, once both bids are tied to the same forge and the spares reserve is protected. Ask the person running the demo to find that month and to say whose commitment would have to change to recover it: four more March blanks confirmed by the forge, or four taken from spares with a named approver. If neither shop will say where its blanks come from, record the dependency as unknown before calling the award dual-sourced.

There is also a case for buying no software here. If the planning team can already produce this answer and the forge will reserve four more blanks for a firm commitment, price the commitment first. BCG's recommendation of earlier volume commitments points the same way.

For software, the consequence is that a lowest-unit-price comparison misses most of what matters. A buyer needs the lead time as a required quote field, the ability to compare a long-term agreement with tooling and minimum volumes against a spot price, and a record of what each supplier quoted on each revision over a program that can last decades. LightSource preserves every RFQ version and shows Pricing History on the contract page; it does not track allocation or feed alloy indices, and an award optimizer that respects a forge's monthly capacity is Keelvar's territory. Our colleague Andy Hunt covered the resilience side in the convergence problem, including why two nominal sources can depend on one upstream plant.

Controlled Drawings and Quotes

Sending a drawing out for a price is a routine act, and it is also where export-control exposure starts. In May 2021 the U.S. State Department announced a $13 million civil settlement with Honeywell, with up to $5 million suspended for remedial compliance, over alleged unauthorized transfers of controlled drawings, which law-firm summaries of the case describe as sent to foreign suppliers to obtain price estimates. The lesson for sourcing software is to test file access before the RFQ goes out. Our team has written an overview of ITAR for procurement leaders, and the ITAR glossary entry defines the term.

Ask every vendor the same questions. Which suppliers, and which people inside a supplier, can open a given drawing? Can the buyer revoke access mid-event? Where does the data live, and is a U.S.-government-region deployment available? What do support staff and AI features touch? LightSource's answers are the confirmed ones above: per-item supplier visibility and per-property visibility toward suppliers, access groups that restrict projects, items and RFI events inside the buyer's team, controlled sharing or a link to the buyer's own secure server, and GovCloud by request. Data Rooms have no per-file permissions, so treat one as visible to everyone on the connected team. Have export counsel approve the actual deployment, whichever vendor you pick. Our security page lists the attestations LightSource holds.

Supplier Qualification Gaps

Hackett's supplier management guide is the clearest public statement of a problem aerospace buyers know well: approval status is often assigned at the company level, while the real approval is for a process on a part. An AS9100 certificate says a supplier's quality system exists; it does not say that its heat-treat subcontractor is approved for your customer's program. The first article inspection closes the loop after award, and it normally lives in a quality system.

LightSource collects certificates and questionnaires with a request for information and stores them in Data Rooms, and its supplier filtering decides which suppliers see which item, but it does not record per-part approval, although Data Room document analysis does show certificate expiration dates, so a buyer maintaining an approved vendor list keeps that list in the quality system and uses LightSource to invite only the suppliers on it. JAGGAER is the most credible public answer to tracking qualification inside the sourcing tool. Our supplier qualification entry covers the basics.

What It Costs

Few vendors in this category publish a price, so compare the pricing model and what sits outside the license. The suites generally price by module and user count, with implementation as a separate integrator contract. Specialists tend to price as a platform fee plus seats. LightSource's model is platform plus seats with implementation included, and suppliers never pay; we do not publish a dollar figure. For an aerospace buyer, add three lines to any quote: the controlled-data environment (a government-region deployment can change timelines, and we do not state one), the interfaces to ERP, PLM and the quality system, and supplier-side fees. Our broader guide to direct materials platforms covers pricing across twelve vendors.

A Pilot Checklist

Run one real part family through two platforms. The steps below are built so no vendor can pass them with a slide.

  1. Pick a part family with a drawing, a shared component and one pending revision.

  2. Load the BOM and files as you have them and time how long until items carry specs, drawings and quantities.

  3. Send a synthetic controlled drawing to an approved supplier and an unapproved one, then revoke the first.

  4. Issue a line-item RFQ with a cost breakdown that includes material, machine process and cycle time, tooling and logistics.

  5. Revise the drawing mid-event. Keep Rev B valid for an earlier aircraft range, request Rev C for the next, and check that the first round is preserved.

  6. Put two bidders on the same forge and see whether the tool surfaces the shared dependency.

  7. Compare a long-term agreement with an index escalator against a fixed price with tooling and minimums, and cut the ramp in year two.

  8. Challenge one material certificate. In September 2026 the FAA finalized an airworthiness directive after a supplier reported suspect material certifications on titanium cargo-track fittings for Boeing 767-300F freighters, with 43 U.S.-registered aircraft affected, according to the Federal Register. Trace the affected lot, supplier, award and end item through sourcing and quality.

  9. Export the award to an ERP test environment with supplier, part, revision, price and effective date, and check that a rejected row does not duplicate the accepted ones.

Our colleague Mason Morgan wrote about what the Excel-and-email alternative costs in the sourcing bottleneck, and our team's guide to moving from automotive to aerospace procurement covers the cultural side of the change. Count supplier rekeying alongside buyer hours, and stop the clock when purchasing has a usable award, because a pilot can save time on one screen by moving the work to another company.

How We Ranked

LightSource wrote this guide, and LightSource is on the list. To keep it useful we scored every platform, including our own, on the same eight criteria an aerospace sourcing team uses: BOM and drawings, cost breakdown, controlled data, qualification, award optimization, revisions and history, ERP and quality fit, and pricing model. The weights are stated in the "How We Scored" section. Capability notes come from public documentation, public buyer reviews, public analyst pages, LightSource's own product documentation and our own evaluations as of September 29, 2026; where we could not find a capability documented we say "not documented", which is not the same as "not offered". The suites on this list do things LightSource does not: purchase orders, invoicing, indirect spend, auctions, contract management and part-level supplier qualification.

LightSource ranks first because it rates Native on BOM and drawings, the heaviest weight, and on cost breakdown and revisions, and Configured on controlled data, while conceding qualification and capacity-aware awards. For a buyer whose first requirement is part-level qualification, JAGGAER is the better first demo, and for capacity-constrained awards, Keelvar. Analyst mentions are facts, not endorsements: The Hackett Group states that it does not endorse vendors and that its research is not selection advice. Hackett is also a paid implementation partner of Coupa, SAP Ariba, Oracle and Zip, which readers should weigh when we cite it on Coupa and SAP Ariba.

Update log. Published September 29, 2026. Last reviewed September 29, 2026.

Sources

Frequently Asked Questions

What is the best sourcing software for aerospace manufacturers?

It depends on the hard problem. For buy-to-print RFQs built from a BOM with controlled drawings, LightSource ranks first in this guide. For part-level supplier qualification inside the sourcing tool, JAGGAER is the better first demo; for SAP-centered enterprises, SAP Ariba; for capacity-constrained awards, Keelvar.

Which RFQ software fits aerospace tier 1 suppliers quoting buy-to-print forgings and machined parts?

Look for items that carry the drawing and revision, a cost breakdown with machine process lines, and supplier filtering by item. LightSource documents all three; JAGGAER and Ivalua cover the same ground through configuration inside larger suites.

Is there supplier onboarding software that handles NADCAP special process approval?

LightSource collects certificates and questionnaires through RFIs and Data Rooms but does not track per-part or per-process approval status. Hackett's supplier management guide credits JAGGAER with granular qualifications and supply quality management; confirm in a demo how NADCAP scope is recorded.

Which sourcing tools help a space hardware program track long-lead titanium forgings?

Lead time can be a required quote field, and LightSource keeps the raw material and the finished part as items in the same project. No tool in this guide documents allocation tracking or live titanium index feeds, so buyers usually keep those in the ERP or a spreadsheet. LightSource's index pricing is Configured through the formula editor, with no live index feed.

What sourcing platforms let aerospace OEMs re-quote the same part number across a 20-year program and keep the quote history?

LightSource preserves every RFQ version and shows Pricing History and an Item Cost Walk on the contract page, and a contract price can become the next project's baseline. Ask any suite to show quotes from a prior contract against the current revision.

Which cloud sourcing vendors can restrict which suppliers see which ITAR-controlled drawings, and is GovCloud available?

LightSource supports ITAR-controlled sourcing programs, lets buyers choose which suppliers see which items and which item properties they see, restricts projects, items and RFI events to access groups inside the buyer's team, supports controlled sharing or a link to the buyer's own secure FTP server, and offers AWS GovCloud deployment by request. It does not claim FedRAMP authorization, CMMC certification or ITAR registration. Ask other vendors for the same answers and have export counsel approve the deployment.

When does an eVTOL or space startup need sourcing software instead of spreadsheets?

Typical triggers are a second program, the first first article inspection cycle, and more suppliers than one person can track. Hackett's readiness signals for a direct tool include frequent product launches and the need for supplier and part discovery. LightSource's Supplier Discovery and free supplier accounts suit that stage; deployment typically takes about 30 days.

How should a buyer compare an indexed forging bid with a fixed-price bid?

Apply the index only to the share of price it covers: if metal is 40 percent of the base price, a 10 percent index increase raises unit price by 4 percent before any cap or floor. Then compare total cash commitment at planned and reduced volumes, including tooling and minimum purchases. LightSource handles this as Configured, with formulas over item properties and no live index feed.

Do I need a separate sourcing tool if I already use SAP Ariba or Coupa?

Not always. If buying is mostly catalog and contract-based, the suite may be enough. If buyers still build RFQs in Excel and re-key cost breakdowns, a direct materials platform that connects by flat file or API can sit beside the suite and leave orders and invoices in the ERP.

The best sourcing software for aerospace manufacturers depends on the hard problem. LightSource leads for buy-to-print RFQs built from a BOM with controlled drawings, JAGGAER for part-level supplier qualification, Ivalua and SAP Ariba for all-spend suites, and Keelvar for constrained awards. This guide scores seven platforms on eight weighted criteria as of September 29, 2026, with a demo test and the stated gaps for each, including LightSource's own.

Aerospace sourcing is low volume, buy-to-print and approval-gated. A tier 2 shop quoting a forging needs the drawing at the right revision, a supplier that is approved for that process, and a lead time that survives a rate ramp. Most "best procurement software" lists rank suites on breadth and never ask whether a buyer can send a controlled drawing to three approved shops and compare their cost breakdowns line by line. LightSource publishes this guide and ranks its own product first where the criteria support it; the disclosure, the weights and the places where LightSource falls short are stated below.

The Short Answer

The Hackett Group's 2026 guide to direct sourcing tools describes the average tool as building an RFx from a BOM that carries only a part number, a description and a quantity. Aerospace buyers feel that gap sooner than most, because the part number is the smallest piece of what a forging quote depends on. Our verdict by buyer type, as of September 29, 2026:

Buyer

Shortlist

Tier 1 or 2 buying to print

LightSource, then JAGGAER

Space or eVTOL startup

LightSource; spreadsheets until program two

OEM with approval-heavy supply

JAGGAER, then LightSource

Enterprise on SAP

SAP Ariba, then LightSource

Capacity-limited long-lead buys

Keelvar, then JAGGAER

Two rows carry caveats. LightSource does not enforce an approved supplier list per part or track first article inspection (FAI) status, so an OEM whose sourcing system must gate awards on part-level supplier qualification should start with JAGGAER, whose supplier management Hackett credits with granular qualifications. And an enterprise that wants purchase orders, invoices and contracts in one vendor on SAP is better served by SAP Ariba; a direct specialist would sit beside it for the engineering-heavy categories.

How We Scored

We scored each platform, including our own, on eight criteria. The weights reflect where aerospace sourcing time goes: getting the drawing and BOM into a quote, getting comparable cost structures back, and controlling who sees what.

Criterion

Weight

Test

BOM and drawings

20%

RFQ built from a spec-aware item with files

Cost breakdown

15%

Every supplier fills the same structure

Controlled data

15%

Per-supplier access to technical data

Qualification

15%

Approval status per supplier and part

Award optimization

10%

Constraints, splits, backup awards

Revisions and history

10%

Re-quote a change, keep years of quotes

ERP and quality fit

10%

Documented path to ERP and PLM

Pricing model

5%

Stated model, no surprise supplier fees

The categories follow how The Hackett Group defines direct sourcing in its Sourcing (for direct) Solutions guide: BoM management integrated with PLM and ERP, cost analysis, NPI collaboration and predictive cost analytics. We add three aerospace criteria that Hackett treats elsewhere: part-level supplier qualification, which its Supplier Management Solutions guide says average tools assign "more often than not, at a supplier's company level"; optimization with constraints, where its optimization guide separates a true mixed-integer solver from home-grown rounding; and controlled data, which Hackett does not cover and which we weight because export-control mistakes carry penalties.

Ratings use our comparison library vocabulary: Native (documented and in the standard product), Configured (available through per-customer setup or integration), Marketed (claimed or listed without public evidence of the workflow) and Not documented (we could not find it, which is not the same as not offered). Suites often do more than their public documentation shows, so every "Not documented" below is a question for the demo, not a verdict.

The 7 Platforms at a Glance

Platform

Best fit

1. LightSource

Buy-to-print RFQs from a BOM

2. JAGGAER

Part-level supplier qualification

3. Ivalua

Configurable all-spend suite

4. SAP Ariba

SAP-centered enterprises

5. GEP

Software plus managed services

6. Keelvar

Constrained award events

7. Coupa

Indirect and P2P at scale


Rating table of seven sourcing platforms across BOM and drawings, cost breakdown, controlled data, qualification and award optimization
Our ratings of seven platforms on five of the eight aerospace criteria, as of September 29, 2026, based on public documentation, The Hackett Group's September 2026 guides and our own evaluations. "Not documented" means we found no public evidence, not that the capability is absent.

In text, the ratings are: LightSource Native on BOM and drawings and on cost breakdown, Configured on controlled data and award optimization, Not documented on qualification. JAGGAER is Native on qualification and award optimization, Configured on BOM and drawings and cost breakdown, Not documented on controlled data. Ivalua is Configured on BOM and drawings, cost breakdown and award optimization, Not documented on controlled data and qualification. SAP Ariba is Configured on BOM and drawings and cost breakdown, Not documented on the other three. GEP is Native on cost breakdown, Configured on BOM and drawings, Marketed on award optimization, Not documented on controlled data and qualification. Keelvar is Native on award optimization, Not documented on the other four. Coupa is Native on award optimization, Configured on cost breakdown, Not documented on the other three.

The 7 Platforms, Ranked

1. LightSource

What it is: the AI-native direct materials operating system, spec through scale, PLM through ERP. It serves dozens of companies across the mid-market and the Fortune 500, including aerospace manufacturers; not every customer can be named. The Hackett Group lists LightSource in its direct sourcing guide as an "AI-native sourcing platform purpose-built for direct materials procurement."

Best for: tier 1 and tier 2 aerospace manufacturers, space hardware and eVTOL companies that quote buy-to-print parts and want RFQs, cost breakdowns and quote history out of Excel and email without replacing the ERP or PLM.

Strengths. Items are master data with specs, custom properties, revisions and files such as drawings and spec sheets, and a sourcing project can launch from a BOM or a batch of items. Quotes come back in a structure the buyer chooses; the Full Breakdown template has separate tables for raw materials, purchased items, machine and assembly processes, packaging, logistics and markups, which suits machined and forged parts. Item Ingestion reads PDF, Excel and image files, including PDF drawings, to create or update items (it does not read CAD files). Line-item supplier filtering controls which suppliers see which items, every RFQ version is preserved when engineering resends a change, and the contract page carries Pricing History and an Item Cost Walk, which matters when the same part number is quoted again years later. For controlled work, LightSource supports ITAR-controlled sourcing programs and has defense customers, which it does not name; buyers either upload BOMs and parts for controlled sharing with selected suppliers or put a link to their own secure FTP server in the part metadata, so controlled files stay in their environment. Within the buyer's team, projects, items and RFI events can be restricted to access groups; toward suppliers, the buyer chooses which suppliers see which items and which item properties they see. Deployment on AWS GovCloud is available by request. Suppliers use LightSource free, and Supplier Discovery searches a network of more than 100,000 suppliers by company name, process or material. LightSource holds a SOC 2 Type 2 attestation and does not train foundation models on customer RFQ or contract data.

Limits. LightSource has aerospace customers, whom this guide does not name. LightSource does not enforce an approved supplier list per part or track FAI status, and it does not feed titanium and nickel index prices, and it has no allocation tracking, no PPAP or APQP workflow and no capacity-constrained award. Suppliers' certificates can be collected through RFIs and Data Rooms, where document analysis reads expiration dates and shows expired files in red, but approval status per part stays in the quality system. Access-group restrictions apply inside the buyer's team and do not separate viewing from editing, Data Rooms have no per-file permissions, and the response deadline does not lock the RFQ, so late quotes are accepted until the buyer closes the project. Awards create item contracts, not purchase orders, and LightSource does not do purchase orders, invoicing, indirect spend, reverse auctions or contract lifecycle management. Integration runs through Excel Item Sync and a GraphQL API rather than certified prebuilt connectors. LightSource does not claim ITAR registration of its own, FedRAMP authorization, CMMC certification or DFARS 7012 attestations. The company came out of stealth in 2025.

Demo test: put a synthetic controlled item in one RFQ project sent to an approved supplier and an unapproved one, and show what each supplier can open. Then revise the drawing mid-RFQ, keep the Rev B bid for earlier aircraft and ask the buyer which aircraft can still use it and what stops it from becoming the Rev C order.

Pricing model: platform fee plus seats, implementation included; suppliers pay nothing.

Recognition: Gartner Cool Vendor in Sourcing and Procurement Technology, 2025; The Hackett Group 50 to Watch, 2025-2026, listed on Hackett's recognition page; and a new vendor in the Sourcing and Direct Sourcing categories of the Spend Matters Fall 2025 SolutionMap. Index-linked pricing rates Configured: the formula editor references item properties and post-bid modifiers handle freight and tariffs, with no live index feed. See LightSource vs. JAGGAER.

2. JAGGAER

Best for: large manufacturers that want sourcing and supplier governance in one suite and need qualification recorded at a finer grain than the supplier.

Strengths. The Hackett Group credits JAGGAER with "sophisticated direct materials sourcing capabilities" and, in its supplier management guide, with granular qualifications and supply quality management, the nearest public evidence to the part-level approval aerospace buyers ask for. Its optimization engine traces to the 2013 CombineNet acquisition.

Limits. Hackett also describes the suite as built through multiple acquisitions, so buyers should test how item, supplier and contract data move between modules. A recurring complaint among reviewers is rigidity, and in our assessment BOM import sits on an enterprise S2P rollout rather than starting from AI ingestion of drawings and spreadsheets.

Demo test: record a supplier's approval for one process on one part number and show who is blocked from awarding a different part to that supplier. Then withdraw approval for a heat-treat subcontractor after the commercial award and show what purchasing sees for each affected part.

Pricing model: custom-quoted subscription by module; ask for implementation and supplier-side fees in writing.

Direct depth: Module, and the deepest of the suites. See LightSource vs. JAGGAER.

3. Ivalua

Best for: regulated enterprises that want a deeply configurable suite and will invest in configuration and a strong implementation partner.

Strengths. Hackett calls Ivalua a "natively integrated, intuitive and flexible suite" with capabilities for all spend, including direct materials, and it is organically built on one codebase, unlike the acquisition-assembled suites.

Limits. Buyers report that getting value from Ivalua takes data-model expertise, that partner choice matters, and that some manufacturers see the direct module and its integrations as still maturing. Hackett's supplier management entry for Ivalua does not mention part-level qualification. In our evaluations, BOM sync is set up per customer rather than extracted from files.

Demo test: ask for a tooling-life field and an effectivity range on a part, sent to suppliers and shown to the award approver, and record which steps needed the partner.

Pricing model: custom-quoted subscription; ask what implementation and the implementation partner add.

Direct depth: Module. See LightSource vs. Ivalua.

4. SAP Ariba

Best for: enterprises standardized on SAP that want one vendor for every spend type and accept a partner-led rollout.

Strengths. Hackett, a paid SAP Ariba partner (see the disclosure below), calls it a "leading S2P suite platform" with broad capabilities across spend types and a newer category management module, and the integration with SAP ERP means material masters and awards stay in one landscape.

Limits. Hackett's direct guide entry names generic functional blocks and no direct-specific capability. In our evaluations, as of September 29, 2026, sourcing events reference ERP material master rows rather than drawings, properties and revisions, and detailed cost breakdowns usually travel as an Excel attachment. A recurring minority complaint among reviewers is a dated interface that needs training for occasional users, and rollouts are partner-led, so ask who owns the outcome.

Demo test: carry a drawing, a revision and a four-level BOM into an RFQ in the version your plants would receive.

Pricing model: quote-based module subscriptions plus integrator implementation; ask about supplier-side transaction fees.

Direct depth: Module. See LightSource vs. SAP Ariba.

5. GEP

Best for: enterprises that want software and managed procurement services from one provider.

Strengths. Hackett's guides describe a natively integrated suite covering sourcing, cost and should-cost modeling and sourcing execution, usable for indirect and direct spend, with market and category intelligence and BPO services alongside. GEP is the one suite here with a credited should-cost module; LightSource has no should-cost engine, and buyers upload should-costs to an item.

Limits. Implementation and operation often come bundled with GEP services, so ask what the software does without an analyst at the keyboard, and reviewers report that the newest capabilities live on its QUANTUM platform, so existing SMART customers face a migration. Public documentation of aerospace workflows is thin.

Demo test: have GEP repeat its should-cost exercise on a machined bracket without a services analyst operating the screen.

Pricing model: custom quote-based enterprise subscription, often alongside services.

Direct depth: Module. See LightSource vs. GEP.

6. Keelvar

Best for: large tender events, including capacity-limited long-lead buys, where award optimization is the main problem.

Strengths. Hackett lists Keelvar for "AI-powered sourcing automation and optimization capabilities," and the optimization guide separates top tools that use a true mixed-integer solver and can auto-relax blocking constraints from average tools limited to predefined capacity and allocation rules. For allocating a forging across approved sources under capacity ceilings, that is the relevant skill.

Limits. Hackett describes Keelvar as optimization and automation rather than BOM or cost-breakdown management, and in our evaluations it is an optimization engine for large events rather than an item or BOM system of record, so drawings, revisions and part history live elsewhere.

Demo test: give two bidders the same sub-tier forge, remove one press for a quarter and ask the tool to name the first infeasible month.

Pricing model: quote-based enterprise subscription; buyers report event-based tiers, so ask what an event is.

Direct depth: None documented as a system of record. See LightSource vs. Keelvar.

7. Coupa

Best for: companies running indirect spend and procure-to-pay at scale that want broad spend visibility.

Strengths. Coupa is the broadest P2P and indirect suite on this list, and Hackett credits a user-friendly interface, automated sourcing and one of the leading optimization tools, acquired with Trade Extensions in 2017 (Hackett is a paid Coupa partner; see the disclosure below).

Limits. P2P and indirect are Coupa's center of gravity, some manufacturing buyers report gaps bringing direct spend onto the platform, and Hackett's direct guide entry names no direct-specific capability. Coupa sells one configurable product, so a BOM-driven RFQ with a custom cost breakdown must fit the standard event model. Coupa has grown by acquisition in optimization, risk and contracts, so test how those modules share data.

Pricing model: custom quote by module; integrator-led rollout is common, so ask what sits outside the license.

Demo test: build one BOM-driven RFQ with a custom cost breakdown that includes machine process and cycle time, and note whether it fits the standard event or needs an Excel attachment.

Direct depth: None under this guide's BOM-module definition, although Coupa can buy direct spend. See LightSource vs. Coupa.

What Makes Aerospace Different

Direct materials here are parts with a drawing, a revision, a material, a process and an approval history, so a quote is only comparable if it prices the same revision from a supplier approved for that work. Our colleague Mason Morgan wrote about getting bill of materials data into shape before sourcing, and the same discipline applies to a bill of materials four levels deep with shared parts.

The constraint is often physical. BCG's 2024 analysis of aerospace casting and forging reported titanium lead times of about nine months, 70 to 80 weeks (roughly 16 to 18 months) for one high-demand steel alloy from a single supplier, and a manufacturing cycle of 6 to 18-plus months. BCG's recommendation was commitment: volume commitments earlier in a contract, contracts of at least 10 years against the five to seven most carry today, and investment in capacity. The pressure shows up in the 2026 data as well. IATA put the global aircraft order backlog at 18,100 in May 2026, and Roland Berger's survey of 95 European aerospace companies found 55 percent still facing relevant supply chain disruptions and about 80 percent expecting constraints on critical raw materials such as special alloys. The U.S. Geological Survey reported that the United States produced no titanium sponge in 2025 and imported an estimated 44,000 metric tons, a record, with Japan supplying 73 percent through July 2025.


Chart of aerospace sourcing pressure: titanium lead time about 9 months, steel alloy 16 to 18 months, full cycle 6 to 18 plus months, beside a backlog of 18,100 aircraft, 55 percent of surveyed European aerospace companies facing disruption and 44,000 tons of titanium sponge imported
Long-lead metal and a record backlog meet in the same RFQ: lead times from BCG (July 2024), backlog from IATA (June 2026), company disruption and raw material expectations from Roland Berger (June 2026), titanium sponge imports from USGS (2026). The sources use different populations and periods.

The Shared Forge Test

Give every vendor the same fictional fitting. Two approved machine shops each offer 30 fittings a month, and both buy one blank per fitting from the same forge. The forge commits 60 blanks a month to the program, 8 of them reserved for spares, which leaves 52. Each shipset needs two fittings, and a revised blank introduced in March cannot be built early, so January and February surplus cannot be banked.

Plan

Jan

Feb

Mar

Shipsets

22

25

28

Fittings needed

44

50

56

Blanks available

52

52

52

Margin

+8

+2

-4

A 50/50 award looks feasible at the machine shops, since each needs 28 fittings against an offer of 30. March is still short four fittings, or two shipsets, once both bids are tied to the same forge and the spares reserve is protected. Ask the person running the demo to find that month and to say whose commitment would have to change to recover it: four more March blanks confirmed by the forge, or four taken from spares with a named approver. If neither shop will say where its blanks come from, record the dependency as unknown before calling the award dual-sourced.

There is also a case for buying no software here. If the planning team can already produce this answer and the forge will reserve four more blanks for a firm commitment, price the commitment first. BCG's recommendation of earlier volume commitments points the same way.

For software, the consequence is that a lowest-unit-price comparison misses most of what matters. A buyer needs the lead time as a required quote field, the ability to compare a long-term agreement with tooling and minimum volumes against a spot price, and a record of what each supplier quoted on each revision over a program that can last decades. LightSource preserves every RFQ version and shows Pricing History on the contract page; it does not track allocation or feed alloy indices, and an award optimizer that respects a forge's monthly capacity is Keelvar's territory. Our colleague Andy Hunt covered the resilience side in the convergence problem, including why two nominal sources can depend on one upstream plant.

Controlled Drawings and Quotes

Sending a drawing out for a price is a routine act, and it is also where export-control exposure starts. In May 2021 the U.S. State Department announced a $13 million civil settlement with Honeywell, with up to $5 million suspended for remedial compliance, over alleged unauthorized transfers of controlled drawings, which law-firm summaries of the case describe as sent to foreign suppliers to obtain price estimates. The lesson for sourcing software is to test file access before the RFQ goes out. Our team has written an overview of ITAR for procurement leaders, and the ITAR glossary entry defines the term.

Ask every vendor the same questions. Which suppliers, and which people inside a supplier, can open a given drawing? Can the buyer revoke access mid-event? Where does the data live, and is a U.S.-government-region deployment available? What do support staff and AI features touch? LightSource's answers are the confirmed ones above: per-item supplier visibility and per-property visibility toward suppliers, access groups that restrict projects, items and RFI events inside the buyer's team, controlled sharing or a link to the buyer's own secure server, and GovCloud by request. Data Rooms have no per-file permissions, so treat one as visible to everyone on the connected team. Have export counsel approve the actual deployment, whichever vendor you pick. Our security page lists the attestations LightSource holds.

Supplier Qualification Gaps

Hackett's supplier management guide is the clearest public statement of a problem aerospace buyers know well: approval status is often assigned at the company level, while the real approval is for a process on a part. An AS9100 certificate says a supplier's quality system exists; it does not say that its heat-treat subcontractor is approved for your customer's program. The first article inspection closes the loop after award, and it normally lives in a quality system.

LightSource collects certificates and questionnaires with a request for information and stores them in Data Rooms, and its supplier filtering decides which suppliers see which item, but it does not record per-part approval, although Data Room document analysis does show certificate expiration dates, so a buyer maintaining an approved vendor list keeps that list in the quality system and uses LightSource to invite only the suppliers on it. JAGGAER is the most credible public answer to tracking qualification inside the sourcing tool. Our supplier qualification entry covers the basics.

What It Costs

Few vendors in this category publish a price, so compare the pricing model and what sits outside the license. The suites generally price by module and user count, with implementation as a separate integrator contract. Specialists tend to price as a platform fee plus seats. LightSource's model is platform plus seats with implementation included, and suppliers never pay; we do not publish a dollar figure. For an aerospace buyer, add three lines to any quote: the controlled-data environment (a government-region deployment can change timelines, and we do not state one), the interfaces to ERP, PLM and the quality system, and supplier-side fees. Our broader guide to direct materials platforms covers pricing across twelve vendors.

A Pilot Checklist

Run one real part family through two platforms. The steps below are built so no vendor can pass them with a slide.

  1. Pick a part family with a drawing, a shared component and one pending revision.

  2. Load the BOM and files as you have them and time how long until items carry specs, drawings and quantities.

  3. Send a synthetic controlled drawing to an approved supplier and an unapproved one, then revoke the first.

  4. Issue a line-item RFQ with a cost breakdown that includes material, machine process and cycle time, tooling and logistics.

  5. Revise the drawing mid-event. Keep Rev B valid for an earlier aircraft range, request Rev C for the next, and check that the first round is preserved.

  6. Put two bidders on the same forge and see whether the tool surfaces the shared dependency.

  7. Compare a long-term agreement with an index escalator against a fixed price with tooling and minimums, and cut the ramp in year two.

  8. Challenge one material certificate. In September 2026 the FAA finalized an airworthiness directive after a supplier reported suspect material certifications on titanium cargo-track fittings for Boeing 767-300F freighters, with 43 U.S.-registered aircraft affected, according to the Federal Register. Trace the affected lot, supplier, award and end item through sourcing and quality.

  9. Export the award to an ERP test environment with supplier, part, revision, price and effective date, and check that a rejected row does not duplicate the accepted ones.

Our colleague Mason Morgan wrote about what the Excel-and-email alternative costs in the sourcing bottleneck, and our team's guide to moving from automotive to aerospace procurement covers the cultural side of the change. Count supplier rekeying alongside buyer hours, and stop the clock when purchasing has a usable award, because a pilot can save time on one screen by moving the work to another company.

How We Ranked

LightSource wrote this guide, and LightSource is on the list. To keep it useful we scored every platform, including our own, on the same eight criteria an aerospace sourcing team uses: BOM and drawings, cost breakdown, controlled data, qualification, award optimization, revisions and history, ERP and quality fit, and pricing model. The weights are stated in the "How We Scored" section. Capability notes come from public documentation, public buyer reviews, public analyst pages, LightSource's own product documentation and our own evaluations as of September 29, 2026; where we could not find a capability documented we say "not documented", which is not the same as "not offered". The suites on this list do things LightSource does not: purchase orders, invoicing, indirect spend, auctions, contract management and part-level supplier qualification.

LightSource ranks first because it rates Native on BOM and drawings, the heaviest weight, and on cost breakdown and revisions, and Configured on controlled data, while conceding qualification and capacity-aware awards. For a buyer whose first requirement is part-level qualification, JAGGAER is the better first demo, and for capacity-constrained awards, Keelvar. Analyst mentions are facts, not endorsements: The Hackett Group states that it does not endorse vendors and that its research is not selection advice. Hackett is also a paid implementation partner of Coupa, SAP Ariba, Oracle and Zip, which readers should weigh when we cite it on Coupa and SAP Ariba.

Update log. Published September 29, 2026. Last reviewed September 29, 2026.

Sources

Frequently Asked Questions

What is the best sourcing software for aerospace manufacturers?

It depends on the hard problem. For buy-to-print RFQs built from a BOM with controlled drawings, LightSource ranks first in this guide. For part-level supplier qualification inside the sourcing tool, JAGGAER is the better first demo; for SAP-centered enterprises, SAP Ariba; for capacity-constrained awards, Keelvar.

Which RFQ software fits aerospace tier 1 suppliers quoting buy-to-print forgings and machined parts?

Look for items that carry the drawing and revision, a cost breakdown with machine process lines, and supplier filtering by item. LightSource documents all three; JAGGAER and Ivalua cover the same ground through configuration inside larger suites.

Is there supplier onboarding software that handles NADCAP special process approval?

LightSource collects certificates and questionnaires through RFIs and Data Rooms but does not track per-part or per-process approval status. Hackett's supplier management guide credits JAGGAER with granular qualifications and supply quality management; confirm in a demo how NADCAP scope is recorded.

Which sourcing tools help a space hardware program track long-lead titanium forgings?

Lead time can be a required quote field, and LightSource keeps the raw material and the finished part as items in the same project. No tool in this guide documents allocation tracking or live titanium index feeds, so buyers usually keep those in the ERP or a spreadsheet. LightSource's index pricing is Configured through the formula editor, with no live index feed.

What sourcing platforms let aerospace OEMs re-quote the same part number across a 20-year program and keep the quote history?

LightSource preserves every RFQ version and shows Pricing History and an Item Cost Walk on the contract page, and a contract price can become the next project's baseline. Ask any suite to show quotes from a prior contract against the current revision.

Which cloud sourcing vendors can restrict which suppliers see which ITAR-controlled drawings, and is GovCloud available?

LightSource supports ITAR-controlled sourcing programs, lets buyers choose which suppliers see which items and which item properties they see, restricts projects, items and RFI events to access groups inside the buyer's team, supports controlled sharing or a link to the buyer's own secure FTP server, and offers AWS GovCloud deployment by request. It does not claim FedRAMP authorization, CMMC certification or ITAR registration. Ask other vendors for the same answers and have export counsel approve the deployment.

When does an eVTOL or space startup need sourcing software instead of spreadsheets?

Typical triggers are a second program, the first first article inspection cycle, and more suppliers than one person can track. Hackett's readiness signals for a direct tool include frequent product launches and the need for supplier and part discovery. LightSource's Supplier Discovery and free supplier accounts suit that stage; deployment typically takes about 30 days.

How should a buyer compare an indexed forging bid with a fixed-price bid?

Apply the index only to the share of price it covers: if metal is 40 percent of the base price, a 10 percent index increase raises unit price by 4 percent before any cap or floor. Then compare total cash commitment at planned and reduced volumes, including tooling and minimum purchases. LightSource handles this as Configured, with formulas over item properties and no live index feed.

Do I need a separate sourcing tool if I already use SAP Ariba or Coupa?

Not always. If buying is mostly catalog and contract-based, the suite may be enough. If buyers still build RFQs in Excel and re-key cost breakdowns, a direct materials platform that connects by flat file or API can sit beside the suite and leave orders and invoices in the ERP.

The best sourcing software for aerospace manufacturers depends on the hard problem. LightSource leads for buy-to-print RFQs built from a BOM with controlled drawings, JAGGAER for part-level supplier qualification, Ivalua and SAP Ariba for all-spend suites, and Keelvar for constrained awards. This guide scores seven platforms on eight weighted criteria as of September 29, 2026, with a demo test and the stated gaps for each, including LightSource's own.

Aerospace sourcing is low volume, buy-to-print and approval-gated. A tier 2 shop quoting a forging needs the drawing at the right revision, a supplier that is approved for that process, and a lead time that survives a rate ramp. Most "best procurement software" lists rank suites on breadth and never ask whether a buyer can send a controlled drawing to three approved shops and compare their cost breakdowns line by line. LightSource publishes this guide and ranks its own product first where the criteria support it; the disclosure, the weights and the places where LightSource falls short are stated below.

The Short Answer

The Hackett Group's 2026 guide to direct sourcing tools describes the average tool as building an RFx from a BOM that carries only a part number, a description and a quantity. Aerospace buyers feel that gap sooner than most, because the part number is the smallest piece of what a forging quote depends on. Our verdict by buyer type, as of September 29, 2026:

Buyer

Shortlist

Tier 1 or 2 buying to print

LightSource, then JAGGAER

Space or eVTOL startup

LightSource; spreadsheets until program two

OEM with approval-heavy supply

JAGGAER, then LightSource

Enterprise on SAP

SAP Ariba, then LightSource

Capacity-limited long-lead buys

Keelvar, then JAGGAER

Two rows carry caveats. LightSource does not enforce an approved supplier list per part or track first article inspection (FAI) status, so an OEM whose sourcing system must gate awards on part-level supplier qualification should start with JAGGAER, whose supplier management Hackett credits with granular qualifications. And an enterprise that wants purchase orders, invoices and contracts in one vendor on SAP is better served by SAP Ariba; a direct specialist would sit beside it for the engineering-heavy categories.

How We Scored

We scored each platform, including our own, on eight criteria. The weights reflect where aerospace sourcing time goes: getting the drawing and BOM into a quote, getting comparable cost structures back, and controlling who sees what.

Criterion

Weight

Test

BOM and drawings

20%

RFQ built from a spec-aware item with files

Cost breakdown

15%

Every supplier fills the same structure

Controlled data

15%

Per-supplier access to technical data

Qualification

15%

Approval status per supplier and part

Award optimization

10%

Constraints, splits, backup awards

Revisions and history

10%

Re-quote a change, keep years of quotes

ERP and quality fit

10%

Documented path to ERP and PLM

Pricing model

5%

Stated model, no surprise supplier fees

The categories follow how The Hackett Group defines direct sourcing in its Sourcing (for direct) Solutions guide: BoM management integrated with PLM and ERP, cost analysis, NPI collaboration and predictive cost analytics. We add three aerospace criteria that Hackett treats elsewhere: part-level supplier qualification, which its Supplier Management Solutions guide says average tools assign "more often than not, at a supplier's company level"; optimization with constraints, where its optimization guide separates a true mixed-integer solver from home-grown rounding; and controlled data, which Hackett does not cover and which we weight because export-control mistakes carry penalties.

Ratings use our comparison library vocabulary: Native (documented and in the standard product), Configured (available through per-customer setup or integration), Marketed (claimed or listed without public evidence of the workflow) and Not documented (we could not find it, which is not the same as not offered). Suites often do more than their public documentation shows, so every "Not documented" below is a question for the demo, not a verdict.

The 7 Platforms at a Glance

Platform

Best fit

1. LightSource

Buy-to-print RFQs from a BOM

2. JAGGAER

Part-level supplier qualification

3. Ivalua

Configurable all-spend suite

4. SAP Ariba

SAP-centered enterprises

5. GEP

Software plus managed services

6. Keelvar

Constrained award events

7. Coupa

Indirect and P2P at scale


Rating table of seven sourcing platforms across BOM and drawings, cost breakdown, controlled data, qualification and award optimization
Our ratings of seven platforms on five of the eight aerospace criteria, as of September 29, 2026, based on public documentation, The Hackett Group's September 2026 guides and our own evaluations. "Not documented" means we found no public evidence, not that the capability is absent.

In text, the ratings are: LightSource Native on BOM and drawings and on cost breakdown, Configured on controlled data and award optimization, Not documented on qualification. JAGGAER is Native on qualification and award optimization, Configured on BOM and drawings and cost breakdown, Not documented on controlled data. Ivalua is Configured on BOM and drawings, cost breakdown and award optimization, Not documented on controlled data and qualification. SAP Ariba is Configured on BOM and drawings and cost breakdown, Not documented on the other three. GEP is Native on cost breakdown, Configured on BOM and drawings, Marketed on award optimization, Not documented on controlled data and qualification. Keelvar is Native on award optimization, Not documented on the other four. Coupa is Native on award optimization, Configured on cost breakdown, Not documented on the other three.

The 7 Platforms, Ranked

1. LightSource

What it is: the AI-native direct materials operating system, spec through scale, PLM through ERP. It serves dozens of companies across the mid-market and the Fortune 500, including aerospace manufacturers; not every customer can be named. The Hackett Group lists LightSource in its direct sourcing guide as an "AI-native sourcing platform purpose-built for direct materials procurement."

Best for: tier 1 and tier 2 aerospace manufacturers, space hardware and eVTOL companies that quote buy-to-print parts and want RFQs, cost breakdowns and quote history out of Excel and email without replacing the ERP or PLM.

Strengths. Items are master data with specs, custom properties, revisions and files such as drawings and spec sheets, and a sourcing project can launch from a BOM or a batch of items. Quotes come back in a structure the buyer chooses; the Full Breakdown template has separate tables for raw materials, purchased items, machine and assembly processes, packaging, logistics and markups, which suits machined and forged parts. Item Ingestion reads PDF, Excel and image files, including PDF drawings, to create or update items (it does not read CAD files). Line-item supplier filtering controls which suppliers see which items, every RFQ version is preserved when engineering resends a change, and the contract page carries Pricing History and an Item Cost Walk, which matters when the same part number is quoted again years later. For controlled work, LightSource supports ITAR-controlled sourcing programs and has defense customers, which it does not name; buyers either upload BOMs and parts for controlled sharing with selected suppliers or put a link to their own secure FTP server in the part metadata, so controlled files stay in their environment. Within the buyer's team, projects, items and RFI events can be restricted to access groups; toward suppliers, the buyer chooses which suppliers see which items and which item properties they see. Deployment on AWS GovCloud is available by request. Suppliers use LightSource free, and Supplier Discovery searches a network of more than 100,000 suppliers by company name, process or material. LightSource holds a SOC 2 Type 2 attestation and does not train foundation models on customer RFQ or contract data.

Limits. LightSource has aerospace customers, whom this guide does not name. LightSource does not enforce an approved supplier list per part or track FAI status, and it does not feed titanium and nickel index prices, and it has no allocation tracking, no PPAP or APQP workflow and no capacity-constrained award. Suppliers' certificates can be collected through RFIs and Data Rooms, where document analysis reads expiration dates and shows expired files in red, but approval status per part stays in the quality system. Access-group restrictions apply inside the buyer's team and do not separate viewing from editing, Data Rooms have no per-file permissions, and the response deadline does not lock the RFQ, so late quotes are accepted until the buyer closes the project. Awards create item contracts, not purchase orders, and LightSource does not do purchase orders, invoicing, indirect spend, reverse auctions or contract lifecycle management. Integration runs through Excel Item Sync and a GraphQL API rather than certified prebuilt connectors. LightSource does not claim ITAR registration of its own, FedRAMP authorization, CMMC certification or DFARS 7012 attestations. The company came out of stealth in 2025.

Demo test: put a synthetic controlled item in one RFQ project sent to an approved supplier and an unapproved one, and show what each supplier can open. Then revise the drawing mid-RFQ, keep the Rev B bid for earlier aircraft and ask the buyer which aircraft can still use it and what stops it from becoming the Rev C order.

Pricing model: platform fee plus seats, implementation included; suppliers pay nothing.

Recognition: Gartner Cool Vendor in Sourcing and Procurement Technology, 2025; The Hackett Group 50 to Watch, 2025-2026, listed on Hackett's recognition page; and a new vendor in the Sourcing and Direct Sourcing categories of the Spend Matters Fall 2025 SolutionMap. Index-linked pricing rates Configured: the formula editor references item properties and post-bid modifiers handle freight and tariffs, with no live index feed. See LightSource vs. JAGGAER.

2. JAGGAER

Best for: large manufacturers that want sourcing and supplier governance in one suite and need qualification recorded at a finer grain than the supplier.

Strengths. The Hackett Group credits JAGGAER with "sophisticated direct materials sourcing capabilities" and, in its supplier management guide, with granular qualifications and supply quality management, the nearest public evidence to the part-level approval aerospace buyers ask for. Its optimization engine traces to the 2013 CombineNet acquisition.

Limits. Hackett also describes the suite as built through multiple acquisitions, so buyers should test how item, supplier and contract data move between modules. A recurring complaint among reviewers is rigidity, and in our assessment BOM import sits on an enterprise S2P rollout rather than starting from AI ingestion of drawings and spreadsheets.

Demo test: record a supplier's approval for one process on one part number and show who is blocked from awarding a different part to that supplier. Then withdraw approval for a heat-treat subcontractor after the commercial award and show what purchasing sees for each affected part.

Pricing model: custom-quoted subscription by module; ask for implementation and supplier-side fees in writing.

Direct depth: Module, and the deepest of the suites. See LightSource vs. JAGGAER.

3. Ivalua

Best for: regulated enterprises that want a deeply configurable suite and will invest in configuration and a strong implementation partner.

Strengths. Hackett calls Ivalua a "natively integrated, intuitive and flexible suite" with capabilities for all spend, including direct materials, and it is organically built on one codebase, unlike the acquisition-assembled suites.

Limits. Buyers report that getting value from Ivalua takes data-model expertise, that partner choice matters, and that some manufacturers see the direct module and its integrations as still maturing. Hackett's supplier management entry for Ivalua does not mention part-level qualification. In our evaluations, BOM sync is set up per customer rather than extracted from files.

Demo test: ask for a tooling-life field and an effectivity range on a part, sent to suppliers and shown to the award approver, and record which steps needed the partner.

Pricing model: custom-quoted subscription; ask what implementation and the implementation partner add.

Direct depth: Module. See LightSource vs. Ivalua.

4. SAP Ariba

Best for: enterprises standardized on SAP that want one vendor for every spend type and accept a partner-led rollout.

Strengths. Hackett, a paid SAP Ariba partner (see the disclosure below), calls it a "leading S2P suite platform" with broad capabilities across spend types and a newer category management module, and the integration with SAP ERP means material masters and awards stay in one landscape.

Limits. Hackett's direct guide entry names generic functional blocks and no direct-specific capability. In our evaluations, as of September 29, 2026, sourcing events reference ERP material master rows rather than drawings, properties and revisions, and detailed cost breakdowns usually travel as an Excel attachment. A recurring minority complaint among reviewers is a dated interface that needs training for occasional users, and rollouts are partner-led, so ask who owns the outcome.

Demo test: carry a drawing, a revision and a four-level BOM into an RFQ in the version your plants would receive.

Pricing model: quote-based module subscriptions plus integrator implementation; ask about supplier-side transaction fees.

Direct depth: Module. See LightSource vs. SAP Ariba.

5. GEP

Best for: enterprises that want software and managed procurement services from one provider.

Strengths. Hackett's guides describe a natively integrated suite covering sourcing, cost and should-cost modeling and sourcing execution, usable for indirect and direct spend, with market and category intelligence and BPO services alongside. GEP is the one suite here with a credited should-cost module; LightSource has no should-cost engine, and buyers upload should-costs to an item.

Limits. Implementation and operation often come bundled with GEP services, so ask what the software does without an analyst at the keyboard, and reviewers report that the newest capabilities live on its QUANTUM platform, so existing SMART customers face a migration. Public documentation of aerospace workflows is thin.

Demo test: have GEP repeat its should-cost exercise on a machined bracket without a services analyst operating the screen.

Pricing model: custom quote-based enterprise subscription, often alongside services.

Direct depth: Module. See LightSource vs. GEP.

6. Keelvar

Best for: large tender events, including capacity-limited long-lead buys, where award optimization is the main problem.

Strengths. Hackett lists Keelvar for "AI-powered sourcing automation and optimization capabilities," and the optimization guide separates top tools that use a true mixed-integer solver and can auto-relax blocking constraints from average tools limited to predefined capacity and allocation rules. For allocating a forging across approved sources under capacity ceilings, that is the relevant skill.

Limits. Hackett describes Keelvar as optimization and automation rather than BOM or cost-breakdown management, and in our evaluations it is an optimization engine for large events rather than an item or BOM system of record, so drawings, revisions and part history live elsewhere.

Demo test: give two bidders the same sub-tier forge, remove one press for a quarter and ask the tool to name the first infeasible month.

Pricing model: quote-based enterprise subscription; buyers report event-based tiers, so ask what an event is.

Direct depth: None documented as a system of record. See LightSource vs. Keelvar.

7. Coupa

Best for: companies running indirect spend and procure-to-pay at scale that want broad spend visibility.

Strengths. Coupa is the broadest P2P and indirect suite on this list, and Hackett credits a user-friendly interface, automated sourcing and one of the leading optimization tools, acquired with Trade Extensions in 2017 (Hackett is a paid Coupa partner; see the disclosure below).

Limits. P2P and indirect are Coupa's center of gravity, some manufacturing buyers report gaps bringing direct spend onto the platform, and Hackett's direct guide entry names no direct-specific capability. Coupa sells one configurable product, so a BOM-driven RFQ with a custom cost breakdown must fit the standard event model. Coupa has grown by acquisition in optimization, risk and contracts, so test how those modules share data.

Pricing model: custom quote by module; integrator-led rollout is common, so ask what sits outside the license.

Demo test: build one BOM-driven RFQ with a custom cost breakdown that includes machine process and cycle time, and note whether it fits the standard event or needs an Excel attachment.

Direct depth: None under this guide's BOM-module definition, although Coupa can buy direct spend. See LightSource vs. Coupa.

What Makes Aerospace Different

Direct materials here are parts with a drawing, a revision, a material, a process and an approval history, so a quote is only comparable if it prices the same revision from a supplier approved for that work. Our colleague Mason Morgan wrote about getting bill of materials data into shape before sourcing, and the same discipline applies to a bill of materials four levels deep with shared parts.

The constraint is often physical. BCG's 2024 analysis of aerospace casting and forging reported titanium lead times of about nine months, 70 to 80 weeks (roughly 16 to 18 months) for one high-demand steel alloy from a single supplier, and a manufacturing cycle of 6 to 18-plus months. BCG's recommendation was commitment: volume commitments earlier in a contract, contracts of at least 10 years against the five to seven most carry today, and investment in capacity. The pressure shows up in the 2026 data as well. IATA put the global aircraft order backlog at 18,100 in May 2026, and Roland Berger's survey of 95 European aerospace companies found 55 percent still facing relevant supply chain disruptions and about 80 percent expecting constraints on critical raw materials such as special alloys. The U.S. Geological Survey reported that the United States produced no titanium sponge in 2025 and imported an estimated 44,000 metric tons, a record, with Japan supplying 73 percent through July 2025.


Chart of aerospace sourcing pressure: titanium lead time about 9 months, steel alloy 16 to 18 months, full cycle 6 to 18 plus months, beside a backlog of 18,100 aircraft, 55 percent of surveyed European aerospace companies facing disruption and 44,000 tons of titanium sponge imported
Long-lead metal and a record backlog meet in the same RFQ: lead times from BCG (July 2024), backlog from IATA (June 2026), company disruption and raw material expectations from Roland Berger (June 2026), titanium sponge imports from USGS (2026). The sources use different populations and periods.

The Shared Forge Test

Give every vendor the same fictional fitting. Two approved machine shops each offer 30 fittings a month, and both buy one blank per fitting from the same forge. The forge commits 60 blanks a month to the program, 8 of them reserved for spares, which leaves 52. Each shipset needs two fittings, and a revised blank introduced in March cannot be built early, so January and February surplus cannot be banked.

Plan

Jan

Feb

Mar

Shipsets

22

25

28

Fittings needed

44

50

56

Blanks available

52

52

52

Margin

+8

+2

-4

A 50/50 award looks feasible at the machine shops, since each needs 28 fittings against an offer of 30. March is still short four fittings, or two shipsets, once both bids are tied to the same forge and the spares reserve is protected. Ask the person running the demo to find that month and to say whose commitment would have to change to recover it: four more March blanks confirmed by the forge, or four taken from spares with a named approver. If neither shop will say where its blanks come from, record the dependency as unknown before calling the award dual-sourced.

There is also a case for buying no software here. If the planning team can already produce this answer and the forge will reserve four more blanks for a firm commitment, price the commitment first. BCG's recommendation of earlier volume commitments points the same way.

For software, the consequence is that a lowest-unit-price comparison misses most of what matters. A buyer needs the lead time as a required quote field, the ability to compare a long-term agreement with tooling and minimum volumes against a spot price, and a record of what each supplier quoted on each revision over a program that can last decades. LightSource preserves every RFQ version and shows Pricing History on the contract page; it does not track allocation or feed alloy indices, and an award optimizer that respects a forge's monthly capacity is Keelvar's territory. Our colleague Andy Hunt covered the resilience side in the convergence problem, including why two nominal sources can depend on one upstream plant.

Controlled Drawings and Quotes

Sending a drawing out for a price is a routine act, and it is also where export-control exposure starts. In May 2021 the U.S. State Department announced a $13 million civil settlement with Honeywell, with up to $5 million suspended for remedial compliance, over alleged unauthorized transfers of controlled drawings, which law-firm summaries of the case describe as sent to foreign suppliers to obtain price estimates. The lesson for sourcing software is to test file access before the RFQ goes out. Our team has written an overview of ITAR for procurement leaders, and the ITAR glossary entry defines the term.

Ask every vendor the same questions. Which suppliers, and which people inside a supplier, can open a given drawing? Can the buyer revoke access mid-event? Where does the data live, and is a U.S.-government-region deployment available? What do support staff and AI features touch? LightSource's answers are the confirmed ones above: per-item supplier visibility and per-property visibility toward suppliers, access groups that restrict projects, items and RFI events inside the buyer's team, controlled sharing or a link to the buyer's own secure server, and GovCloud by request. Data Rooms have no per-file permissions, so treat one as visible to everyone on the connected team. Have export counsel approve the actual deployment, whichever vendor you pick. Our security page lists the attestations LightSource holds.

Supplier Qualification Gaps

Hackett's supplier management guide is the clearest public statement of a problem aerospace buyers know well: approval status is often assigned at the company level, while the real approval is for a process on a part. An AS9100 certificate says a supplier's quality system exists; it does not say that its heat-treat subcontractor is approved for your customer's program. The first article inspection closes the loop after award, and it normally lives in a quality system.

LightSource collects certificates and questionnaires with a request for information and stores them in Data Rooms, and its supplier filtering decides which suppliers see which item, but it does not record per-part approval, although Data Room document analysis does show certificate expiration dates, so a buyer maintaining an approved vendor list keeps that list in the quality system and uses LightSource to invite only the suppliers on it. JAGGAER is the most credible public answer to tracking qualification inside the sourcing tool. Our supplier qualification entry covers the basics.

What It Costs

Few vendors in this category publish a price, so compare the pricing model and what sits outside the license. The suites generally price by module and user count, with implementation as a separate integrator contract. Specialists tend to price as a platform fee plus seats. LightSource's model is platform plus seats with implementation included, and suppliers never pay; we do not publish a dollar figure. For an aerospace buyer, add three lines to any quote: the controlled-data environment (a government-region deployment can change timelines, and we do not state one), the interfaces to ERP, PLM and the quality system, and supplier-side fees. Our broader guide to direct materials platforms covers pricing across twelve vendors.

A Pilot Checklist

Run one real part family through two platforms. The steps below are built so no vendor can pass them with a slide.

  1. Pick a part family with a drawing, a shared component and one pending revision.

  2. Load the BOM and files as you have them and time how long until items carry specs, drawings and quantities.

  3. Send a synthetic controlled drawing to an approved supplier and an unapproved one, then revoke the first.

  4. Issue a line-item RFQ with a cost breakdown that includes material, machine process and cycle time, tooling and logistics.

  5. Revise the drawing mid-event. Keep Rev B valid for an earlier aircraft range, request Rev C for the next, and check that the first round is preserved.

  6. Put two bidders on the same forge and see whether the tool surfaces the shared dependency.

  7. Compare a long-term agreement with an index escalator against a fixed price with tooling and minimums, and cut the ramp in year two.

  8. Challenge one material certificate. In September 2026 the FAA finalized an airworthiness directive after a supplier reported suspect material certifications on titanium cargo-track fittings for Boeing 767-300F freighters, with 43 U.S.-registered aircraft affected, according to the Federal Register. Trace the affected lot, supplier, award and end item through sourcing and quality.

  9. Export the award to an ERP test environment with supplier, part, revision, price and effective date, and check that a rejected row does not duplicate the accepted ones.

Our colleague Mason Morgan wrote about what the Excel-and-email alternative costs in the sourcing bottleneck, and our team's guide to moving from automotive to aerospace procurement covers the cultural side of the change. Count supplier rekeying alongside buyer hours, and stop the clock when purchasing has a usable award, because a pilot can save time on one screen by moving the work to another company.

How We Ranked

LightSource wrote this guide, and LightSource is on the list. To keep it useful we scored every platform, including our own, on the same eight criteria an aerospace sourcing team uses: BOM and drawings, cost breakdown, controlled data, qualification, award optimization, revisions and history, ERP and quality fit, and pricing model. The weights are stated in the "How We Scored" section. Capability notes come from public documentation, public buyer reviews, public analyst pages, LightSource's own product documentation and our own evaluations as of September 29, 2026; where we could not find a capability documented we say "not documented", which is not the same as "not offered". The suites on this list do things LightSource does not: purchase orders, invoicing, indirect spend, auctions, contract management and part-level supplier qualification.

LightSource ranks first because it rates Native on BOM and drawings, the heaviest weight, and on cost breakdown and revisions, and Configured on controlled data, while conceding qualification and capacity-aware awards. For a buyer whose first requirement is part-level qualification, JAGGAER is the better first demo, and for capacity-constrained awards, Keelvar. Analyst mentions are facts, not endorsements: The Hackett Group states that it does not endorse vendors and that its research is not selection advice. Hackett is also a paid implementation partner of Coupa, SAP Ariba, Oracle and Zip, which readers should weigh when we cite it on Coupa and SAP Ariba.

Update log. Published September 29, 2026. Last reviewed September 29, 2026.

Sources

Frequently Asked Questions

What is the best sourcing software for aerospace manufacturers?

It depends on the hard problem. For buy-to-print RFQs built from a BOM with controlled drawings, LightSource ranks first in this guide. For part-level supplier qualification inside the sourcing tool, JAGGAER is the better first demo; for SAP-centered enterprises, SAP Ariba; for capacity-constrained awards, Keelvar.

Which RFQ software fits aerospace tier 1 suppliers quoting buy-to-print forgings and machined parts?

Look for items that carry the drawing and revision, a cost breakdown with machine process lines, and supplier filtering by item. LightSource documents all three; JAGGAER and Ivalua cover the same ground through configuration inside larger suites.

Is there supplier onboarding software that handles NADCAP special process approval?

LightSource collects certificates and questionnaires through RFIs and Data Rooms but does not track per-part or per-process approval status. Hackett's supplier management guide credits JAGGAER with granular qualifications and supply quality management; confirm in a demo how NADCAP scope is recorded.

Which sourcing tools help a space hardware program track long-lead titanium forgings?

Lead time can be a required quote field, and LightSource keeps the raw material and the finished part as items in the same project. No tool in this guide documents allocation tracking or live titanium index feeds, so buyers usually keep those in the ERP or a spreadsheet. LightSource's index pricing is Configured through the formula editor, with no live index feed.

What sourcing platforms let aerospace OEMs re-quote the same part number across a 20-year program and keep the quote history?

LightSource preserves every RFQ version and shows Pricing History and an Item Cost Walk on the contract page, and a contract price can become the next project's baseline. Ask any suite to show quotes from a prior contract against the current revision.

Which cloud sourcing vendors can restrict which suppliers see which ITAR-controlled drawings, and is GovCloud available?

LightSource supports ITAR-controlled sourcing programs, lets buyers choose which suppliers see which items and which item properties they see, restricts projects, items and RFI events to access groups inside the buyer's team, supports controlled sharing or a link to the buyer's own secure FTP server, and offers AWS GovCloud deployment by request. It does not claim FedRAMP authorization, CMMC certification or ITAR registration. Ask other vendors for the same answers and have export counsel approve the deployment.

When does an eVTOL or space startup need sourcing software instead of spreadsheets?

Typical triggers are a second program, the first first article inspection cycle, and more suppliers than one person can track. Hackett's readiness signals for a direct tool include frequent product launches and the need for supplier and part discovery. LightSource's Supplier Discovery and free supplier accounts suit that stage; deployment typically takes about 30 days.

How should a buyer compare an indexed forging bid with a fixed-price bid?

Apply the index only to the share of price it covers: if metal is 40 percent of the base price, a 10 percent index increase raises unit price by 4 percent before any cap or floor. Then compare total cash commitment at planned and reduced volumes, including tooling and minimum purchases. LightSource handles this as Configured, with formulas over item properties and no live index feed.

Do I need a separate sourcing tool if I already use SAP Ariba or Coupa?

Not always. If buying is mostly catalog and contract-based, the suite may be enough. If buyers still build RFQs in Excel and re-key cost breakdowns, a direct materials platform that connects by flat file or API can sit beside the suite and leave orders and invoices in the ERP.

Faster sourcing,
lower cost, less chaos.

See how LightSource connects engineering, procurement, and suppliers in one operating system to help you launch faster at lower cost.

DPW Award Winner

SOC 2

Hackett Group 2026 Validated

Kearney #1

Gartner Cool Vendor

Procuretech 100

G2 Top Rated

Faster sourcing,
lower cost, less chaos.

See how LightSource connects engineering, procurement, and suppliers in one operating system to help you launch faster at lower cost.

DPW Award Winner

SOC 2

Hackett Group 2026 Validated

Kearney #1

Gartner Cool Vendor

Procuretech 100

G2 Top Rated

Faster sourcing,
lower cost, less chaos.

See how LightSource connects engineering, procurement, and suppliers in one operating system to help you launch faster at lower cost.

DPW Award Winner

SOC 2

Hackett Group 2026 Validated

Kearney #1

Gartner Cool Vendor

Procuretech 100

G2 Top Rated

Trusted by:

  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog

Trusted by:

  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog

Trusted by:

  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog
  • Best Sourcing Software for Aerospace Manufacturers (2026): 7 Platforms Compared — LightSource Blog