Defense Contractor and Defense Tech Sourcing Software: A Buyer's Guide

Defense buyers have to control who sees technical data, know supplier cyber readiness before award, capture country of melt at quote and keep a record of competition. LightSource supports ITAR-controlled sourcing programs, GovCloud deployment by request and controlled CUI sharing, while US-person screening and CMMC status tracking are gaps, and required quote fields are a prompt rather than a hard block. This guide covers the checklist, criteria, RFQ flow and vendors to test.

Who this guide is for

This guide is for sourcing, supplier quality, IT and finance leaders at companies that build hardware for defense customers: prime contractors and their divisions, tier suppliers to primes (machined parts, electronics, power systems and vehicles), defense-tech startups building drones, autonomy, space and counter-UAS systems, and shipbuilding and ground vehicle programs.

For a ranked list, see the companion ranked guide to procurement software for defense manufacturers. This page adds a compliance checklist, a controlled RFQ walkthrough, a price-reasonableness record, a multi-ERP method and a startup path. For the wider category, see the flagship comparison of direct materials procurement software. LightSource wrote this guide and is one of the options in it, so limits are stated with each capability.

What is different here

Six conditions separate defense sourcing from generic manufacturing, each stated the way buyers put it, in italics.

Drawings are controlled data

ITAR technical data cannot be seen by non-US persons, so every supplier and every user has to be screened before a drawing goes out. Under the ITAR, a U.S. person includes lawful permanent residents and protected individuals, and a foreign person is generally anyone who is not one (22 CFR 120.62 and 120.63). An RFQ is a release of technical data, so the question is who receives which file. See the ITAR glossary entry and this blog's ITAR explainer for procurement leaders.

We need to know who is CMMC-ready

CMMC 2.0 and NIST 800-171 flow down to every supplier that touches CUI; we need to know who is compliant before we award. DoD's CMMC program (32 CFR part 170) sets cybersecurity standards for contractors and subcontractors that handle controlled unclassified information, drawing on NIST SP 800-171.

Country of melt is a quote field

DFARS specialty metals restrict where material can come from, so country of melt has to be on the quote. The specialty metals clause requires that specialty metals be "melted or produced in the United States, its outlying areas, or a qualifying country" (DFARS 252.225-7009), subject to exceptions.

Price reasonableness needs a record

Price reasonableness means documented competition: who was invited, who quoted, why we chose. FAR 15.404-1 notes that adequate price competition normally establishes a fair and reasonable price. If you are a tier supplier, your prime's subcontract terms decide which rules reach you, so read them.

Prints travel outside the tool

Our prime's RFQs run through a separate sourcing tool, and the prints go through a different file transfer because the tool is not FedRAMP. Buyers describe this split, which leaves drawings and quotes in two systems with no shared record.

Six business units, six Oracle instances

Six business units on six Oracle instances that do not talk to each other. Sourcing has to work across them without consolidating the ERPs first.

Compliance checklist

Certifying a bid, a registration, a cyber posture or an export decision is the buyer's job. The tool's job is to keep the evidence and limit who sees what.

  • ITAR and EAR. LightSource supports ITAR-controlled sourcing programs and has defense customers. Deployment on AWS GovCloud is available by request. Restrict projects, items and RFI events to access groups, choose which item properties suppliers see, and set which suppliers see which line items. Not claimed: ITAR registration of LightSource itself.

  • DFARS 252.204-7012 and NIST SP 800-171. The clause requires an external cloud provider that stores covered defense information to meet security requirements equivalent to the FedRAMP Moderate baseline. LightSource's CUI handling gives buyers two patterns: upload BOMs and parts for controlled sharing with selected suppliers, or put a link to your own secure FTP server in the part metadata so controlled files never leave your environment. Not claimed: FedRAMP authorization or a DFARS 7012 compliance attestation.

  • CMMC. Know each supplier's status before award. LightSource has no CMMC status tracking feature. Ask the question in an RFI and record the answer as a supplier property. Not claimed: CMMC certification of LightSource.

  • CUI marking. LightSource restricts items to access groups and filters suppliers per line item; it has no documented CUI marking workflow, so keep markings in item properties or on your own file server.

  • Specialty metals. Build country of melt and origin into the quote format as required fields.

  • Electronic parts sources (DFARS 252.246-7008). The clause, titled Sources of Electronic Parts, tells contractors to first obtain electronic parts that are in production by the original manufacturer. Capture each supplier's stated source and attestation as a quote field.

  • FAR Part 15 price reasonableness. Keep the record described in the documented competition section.

  • Certificates (AS9100) and Section 889. Collect each certificate or attestation through an RFI file submission or question. Data Rooms read start and expiration dates from uploaded documents and show expired dates in red.

LightSource's security posture is SOC 2 Type 2, AWS hosting, encryption at rest and in transit, SAML single sign-on, and admins can require MFA for email-and-password sign-ins. It does not train foundation models on customer RFQ, RFI or contract data.

Evaluation criteria

Nine criteria a buyer can test in a demo, weighted for defense. Ratings: Strong (documented in the standard product), Partial (needs configuration or has a limit) and Gap (not documented).

Criterion

Weight

LightSource fit

Controlled technical data

High

Partial

US-person screening

High

Gap

Hosting and CUI path

High

Partial

Mandatory quote fields

High

Partial

Documented competition

High

Partial

CMMC status tracking

High

Gap

Multiple ERPs

Medium

Partial

Cost breakdown

Medium

Strong

Onboarding and security baseline

Medium

Strong

  • Controlled technical data (Partial). Access groups restrict projects, items and RFI events, and a Supplier visibility column sets which suppliers see which line items. The limit: restriction is per record, not per file, and does not separate viewing from editing, so files needing file-level separation belong on your own server.

  • US-person screening (Gap). Nothing documents marking a user or supplier as a U.S. person or ITAR-cleared. Keep that determination in your export compliance process and enforce it per RFQ with line-item filtering.

  • Hosting and CUI path (Partial). GovCloud is available by request and FedRAMP is not claimed. The secure-FTP link keeps controlled files out of the application.

  • Mandatory quote fields (Partial). Quote formats mark fields required, with type validation, and a supplier sees "Required field" issues on review. The product documentation also says a supplier can send a quote with open issues, although the buyer may not be able to use it. Treat required flags as a prompt, not a hard block.

  • Documented competition (Partial). Supplier status, versioned RFQs, comparison export and award approval exist; a sealed-bid lock and audit log do not.

  • CMMC status tracking (Gap). RFI answers and supplier properties only.

  • Multiple ERPs (Partial). One sync or API script per instance; no supplier code mapping across ERPs.

  • Cost breakdown (Strong). Full Breakdown covers materials, purchased items, processes, packaging, logistics and markups.

  • Supplier onboarding and security (Strong). RFIs carry an NDA for the supplier to sign and upload, suppliers use LightSource at no cost, and the security baseline is stated above.

How an RFQ runs

Use this as a demo script with any tool; the steps describe LightSource.

  1. Load the items. Sync items and BOMs from your PLM or ERP export with the PLM/DB Sync template, or add them directly. Mark which item properties suppliers can see and hide the controlled ones.

  2. Restrict the sensitive ones. Restrict controlled items and the project to an access group so only cleared teammates can open them.

  3. Decide where the drawing lives. Either upload the BOM and parts for sharing with the selected suppliers, or put a link to your secure FTP server in the part metadata.

  4. Qualify the suppliers. Send an RFI with your NDA, CMMC, Section 889 and AS9100 questions and review each submission first.

  5. Build the quote format. Add country of melt, a source-of-electronic-parts attestation and certificate fields as required, and use Full Breakdown for machined and electronic assemblies.

  6. Filter suppliers per line. In the Items tab, set Supplier visibility on each line so a shop quoting a bracket does not see the next line, then send the RFQ with a due date.

  7. Chase and review. The Suppliers tab shows each supplier's status, and reminders go out around the due date. Check each quote for blank required fields before comparing.

  8. Compare bids and award. Compare line by line, export to Excel, PDF or a quote package, route the award through up to 20 approvers and submit it to create a contract per awarded item. The purchase order stays in your ERP.

Documented competition

A price-reasonableness file records who was invited, who quoted or declined, what was compared and who approved the award. LightSource keeps supplier status for each RFQ, every RFQ version, the bid comparison with an export, and the award approval; contracts export to Excel, CSV or JSON. Not documented: the RFQ deadline does not lock, so late quotes are accepted until the buyer closes the project, there is no sealed-bid lock, and there is no audit log of who viewed which controlled file. The buyer assembles the packet, and your contract terms decide what is sufficient. See competitive bidding and sole sourcing for the terms.

Six Oracle instances

LightSource does not replace an ERP. It sits above one or several, in these documented ways:

  • Excel Item Sync per instance. Export items from each instance, copy them into the PLM/DB Sync template and upload. Rows match items by exact ID, and nothing changes until you finish the sync.

  • One ID per item. Item IDs are matched per ERP; choose a key every business unit can resolve, and record each unit's Oracle part number as a custom property.

  • GraphQL API. The API behind the app, with team API keys, runs from a script in your environment, and contracts export to Excel, CSV and JSON.

Each company has one external ID in LightSource, so keep any supplier code crosswalk across ERPs with your ERP team. LightSource issues no purchase orders, so Oracle stays the system of record for orders and payments. To test it, run one part bought under two Oracle codes through one event. See the LightSource vs. Oracle comparison and the integrations page.

Defense-tech startups on Arena

A company moving from prototypes to a low-rate order with its BOM in a PLM such as Arena needs items without re-keying, limits on who opens the technical data package, and suppliers who respond. Export the BOM from the PLM to a spreadsheet and sync it with the PLM/DB template; this is a flat-file path, not a prebuilt Arena connector. Suppliers create free accounts from the RFI or RFQ invitation, and an RFI can carry an NDA to sign and return before drawings move. For the technical data package, choose between the two CUI patterns above and use line-item filtering so machine shops and board houses see only their lines. See from automotive to aerospace and supplier qualification.

Vendors to consider

The ranked guide scores eleven options, with pages in the comparison library.

  • LightSource. The AI-native direct materials operating system, spec through scale, PLM through ERP. It supports direct and strategic indirect sourcing and is not built for tactical indirect buying (three bids and a buy). It does not issue purchase orders or invoices and came out of stealth in 2025. The Hackett Group's Sourcing (for direct) Solutions guide lists it; that is a listing, not an endorsement.

  • JAGGAER. A full source-to-pay suite with direct materials roots, and the suite some primes run. Buyers report that prints travel outside the tool, and reviewers describe the modules as feeling like separate applications. See LightSource vs. JAGGAER.

  • Oracle Fusion Procurement. The natural test for contractors already on Oracle ERP, with procurement inside one data model; direct materials features such as PLM are separately licensed modules. See LightSource vs. Oracle.

  • Ivalua and SAP Ariba. Suites for buyers standardizing a whole source-to-pay estate; ask each for its government cloud scope in writing. See Ivalua and SAP Ariba.

  • Coupa, GEP and Silkline. Coupa is strongest in procure-to-pay, GEP pairs software with services and Silkline centers on purchase orders and order tracking, with compliance features aimed at defense and space. See Coupa, GEP and Silkline.

  • Excel with a secure FTP. The usual baseline for technical data packages, with no record of competition and drawings and quotes in two systems. See LightSource vs. Excel.

If your prime requires its own sourcing tool for the RFQ, that stays; LightSource fits the buys you run beneath it.

Public proof

LightSource serves dozens of companies across the mid-market and the Fortune 500, including defense contractors and defense-tech companies; not every customer can be named. LightSource supports ITAR-controlled sourcing programs and has defense customers, none of whom are named here.

One published case study comes from an adjacent industry. In the Blue Bird case study, a school bus maker, RFQs per buyer grew from 34.9 to 48.3 (38 percent more with the same team), average cycle time fell from 16 to 14 days, and 398 supplier companies were onboarded with 99.7 percent active. These are a bus manufacturer's results, not a defense customer's. LightSource's network includes more than 100,000 suppliers.

Sources

Frequently asked questions

Which RFQ software works for defense suppliers with CUI drawings and GovCloud hosting?

LightSource supports ITAR-controlled sourcing programs, and AWS GovCloud deployment is available by request. For CUI, buyers either upload BOMs and parts for controlled sharing with selected suppliers, or link to their own secure FTP server from the part metadata. LightSource does not claim FedRAMP authorization or a DFARS 7012 attestation, so your security team should evaluate the deployment against your contract.

Is there software that tracks supplier CMMC 2.0 and NIST 800-171 status for defense RFQs?

LightSource has no CMMC status tracking feature. Buyers ask in an RFI, review each submission and record the result as a supplier property. That is a manual process with no CMMC status field, so ask any vendor to show how it tracks status.

Which sourcing platforms do tier suppliers to defense primes use to run competitive RFQs and keep a record of who was invited, who quoted, and why the award was made for FAR Part 15 price reasonableness?

Options run from suites to ERP modules to spreadsheets with a secure file transfer, and a tier supplier's choice often depends on the prime's subcontract terms. LightSource keeps supplier status for each RFQ, every RFQ version, a bid comparison that exports to Excel or PDF, and award approval with up to 20 approvers. It has no sealed-bid lock or audit log, so confirm what your subcontract requires; the ranked guide compares alternatives.

Are there direct materials sourcing tools a defense contractor can deploy in AWS GovCloud that work across several business units on separate Oracle ERP instances without consolidating the ERPs first?

LightSource offers GovCloud deployment by request and sits above the ERPs. Run an Excel Item Sync or a GraphQL API script against each Oracle instance and load awarded contracts back through exports. Supplier code mapping across ERPs is not documented.

What sourcing software lets a 60-person counter-UAS startup on Arena send RFQs to machine shops and board houses while controlling which suppliers and users can open ITAR technical data?

Export the BOM from Arena to a spreadsheet and sync it into LightSource with the PLM/DB template. Then restrict controlled items to an access group, set which suppliers see each line item and either share the package in the app or link to your own secure FTP server. LightSource has no documented way to flag a supplier as ITAR-cleared, so your export compliance process makes that call.

Does any RFQ tool make country of melt and a DFARS 7008 counterfeit parts attestation mandatory before a supplier can submit a quote?

In LightSource you can add country of melt and a source-of-electronic-parts attestation as required quote fields with a dropdown, and the supplier sees a Required field issue on review. The product documentation says a supplier can still send a quote with open issues, so it is not a hard block. Ask every vendor whether a required field blocks submission.

Faster sourcing,
lower cost, less chaos.

See how LightSource connects engineering, procurement, and suppliers in one operating system to help you launch faster at lower cost.

DPW Award Winner

SOC 2

Hackett Group 2026 Validated

Kearney #1

Gartner Cool Vendor

Procuretech 100

G2 Top Rated