Medical Device and Diagnostics Sourcing Software: A Buyer's Guide

Device and diagnostics buyers need sourcing software that sends suppliers the controlled drawing revision, collects ISO 13485 questionnaires and certificates, and shows cost inside contract manufacturer assemblies. LightSource covers these through items with revisions, RFIs, Data Rooms and Full Breakdown quotes. It does not track quality agreements or approve suppliers by part. This guide covers what to check, how an RFQ runs and which vendors to test.

Who this guide is for

This guide is for sourcing, supplier quality, NPI, IT and finance leaders at Class II and III device makers, diagnostics and life-science instrument makers, orthopedic and implant makers, consumer health and telehealth hardware companies, and contract manufacturers that build for device makers.

For a ranked list, see the companion ranked guide to sourcing software for medical device manufacturers. This page adds RFI-based qualification, a test for cost inside CM assemblies and an item master method. For the wider category, see the flagship comparison of direct materials procurement software and healthcare procurement 101. LightSource wrote this guide and is one of the options in it, so the limits of each LightSource capability are stated where it is described.

What is different here

Six conditions separate this sector from generic manufacturing, each stated the way buyers put it, in italics.

Changing a supplier is expensive

Changing a supplier triggers design control, validation and sometimes a regulatory filing, so we avoid re-sourcing even when the price is wrong. Inari Medical disclosed in its 2023 annual report that for certain components it could take up to six months to find and qualify a second source. The time to compete a part is before the design history file locks the supplier. See supplier qualification and dual sourcing.

Qualification comes before the first PO

Supplier qualification means audits, a quality agreement and a change-notification clause before the first PO. A tool can collect the questionnaire, certificates and agreement; it does not replace the audit. See supplier audit and the approved vendor list.

Specs live in the DHF and DMR

Specs live in the DHF and DMR; the drawing is controlled and the supplier must quote the right revision. The tool has to freeze what a supplier was sent and keep every version.

The item master is large and messy

We have 200,000 items in the item master and the same part under three numbers. See the bill of materials data guide.

Half the spend sits at contract manufacturers

Half our spend sits at contract manufacturers and we cannot see the cost of what is inside the assembly. A lump-sum assembly price hides the resin, the chip and the labor inside it. See contract manufacturer.

The supplier RFI takes a quarter

Our ISO 13485 supplier RFI takes a quarter to collect by email. See request for information.

Compliance checklist

Certifying a device, a supplier or a quality system is the buyer's job; the tool keeps the evidence. LightSource is not a quality management system and does not claim compliance with 21 CFR 820, QMSR or ISO 13485 for itself or for its customers.

  • FDA QMSR and purchasing controls. The Quality Management System Regulation took effect on February 2, 2026 and incorporates ISO 13485. FDA's final rule describes clause 7.4 as requiring suppliers to be evaluated on ability and performance, in proportion to the effect on the finished device and the risk involved, with monitoring and re-evaluation. LightSource keeps RFI reviews, Data Rooms and supplier scorecards as records; your procedure decides who is approved.

  • ISO 13485 supplier questionnaire. RFI templates carry six question types, including file submission for certificates, and LightSource's RFI guidance uses ISO 13485 as the example knockout criterion for a device molder. Your quality team confirms whether a template satisfies your auditor.

  • Quality agreements and change notification. A Data Room holds the signed agreement as a file. LightSource does not track the agreement or a change-notification clause, and has no change order object, so keep that in your quality system. See engineering change order.

  • Material changes, EU MDR and UDI. Hold the material and any UDI or device data as item custom properties, with revisions. LightSource does not judge whether a change triggers ISO 10993 testing or a filing, and has no UDI feature.

  • REACH, RoHS, conflict minerals and UFLPA. Collect declarations and reporting templates as RFI questions or file submissions. Lot genealogy belongs in the ERP or manufacturing system. See traceability.

  • Certificates on file. Data Rooms read document types and start and expiration dates from uploaded files and show expired dates in red on the AI Document Analysis page. No alert or hold on an expired certificate is documented.

Evaluation criteria

Nine criteria a buyer can test in a demo, weighted for this sector. Ratings: Strong (documented in the standard product), Partial (needs configuration or has a limit) and Gap (not documented).

Criterion

Weight

LightSource fit

Controlled revision on the RFQ

High

Strong

Cost inside CM assemblies

High

Strong

Qualification by RFI

High

Partial

Early sourcing before design lock

High

Strong

Certificates on file

Medium

Partial

Large item master as it is

High

Partial

SAP and PLM handoff

Medium

Partial

Quality agreement tracking

High

Gap

Part-scoped supplier approval

High

Gap

  • Controlled revision (Strong). A revision freezes when sent to a supplier, the next edit starts a new one, and any two revisions compare side by side.

  • Cost inside assemblies (Strong). Full Breakdown has separate tables for purchased items, raw materials and processes, if the contract manufacturer completes them.

  • Qualification by RFI (Partial). Questionnaires, NDA round trip, reviews and export are documented; no qualification status exists beyond RFI plus Data Rooms.

  • Early sourcing (Strong). Projects start from items, with target cost and new rounds; LightSource does not know where a program sits in design control.

  • Certificates (Partial). Expiration dates are shown; no alerts or holds are documented.

  • Item master (Partial). Item Sync takes one file up to 2 GB; a person reviews each AI-flagged duplicate.

  • SAP and PLM (Partial). Spreadsheet sync and a GraphQL API; no prebuilt connector.

  • Quality agreements (Gap). The file can be stored; the clause is not tracked.

  • Part-scoped approval (Gap). Line-item supplier filtering controls which suppliers see which items, the closest documented behavior. Keep the approved supplier list in the ERP or quality system.

How an RFQ runs

Use this flow as a demo script with any tool; the steps describe LightSource.

  1. Load the item master. Export items from SAP and the PLM, copy them into the PLM/DB Sync template and upload it. Rows match items by exact ID, and nothing changes until the sync is finished. PDF drawings go through Item Ingestion, up to 40 files of 25 MB each. CAD can be attached to an item, but ingestion does not read it.

  2. Confirm the revision. Attach the released drawing and specification to the item and take a named snapshot such as Rev C to freeze it.

  3. Qualify first. Send an RFI to candidate suppliers, review each response and shortlist the approved ones.

  4. Create the project. Start from the items or from a BOM, set a volume on each item and set the baseline from the last contract price. Baselines are never shown to suppliers; target cost is, by default.

  5. Choose the quote format. Unit Price Only suits simple parts; Full Breakdown suits contract manufacturer assemblies.

  6. Invite and send. Choose which suppliers see which items. Every supplier fills in the same format; suppliers not yet on LightSource are invited by email.

  7. Revise by resending. If a drawing changes, edit the item, review the project changes page and send an updated RFQ. Suppliers keep the version they received until you send, and the RFQ history keeps each one.

  8. Compare and award. Compare bids line by line against the baseline, add freight and duty as cost modifiers, model award scenarios and route one to up to 20 approvers. Each awarded item becomes an item contract; the purchase order is created in your ERP.

Qualifying suppliers by RFI

An RFI event starts from a reusable template and goes to many suppliers at once. Questions come in six types: paragraph, read-only text, multiple choice, checkboxes, date and time, and file submission. For an NDA, attach yours to a file submission question and ask the supplier to sign and upload it; LightSource has no e-signature, so the signed file is the record.

Reviewers choose Approve, Reject or Request changes on each submission, with a required comment on rejection or a change request. LightSource shows one submission at a time, so compare in the Excel export, which can include uploaded files as a ZIP. Set knockout criteria and weights before responses arrive.

Approved suppliers form the RFQ shortlist, and the documents you then exchange (quality agreements, certificates, test specifications) live in that supplier's Data Room. Both teams see every file.

This is not a supplier qualification workflow: no qualified status gates an RFQ, and there is no change-notification tracker or expiry hold, so record the approval decision in your quality system. Hackett's supplier management guide notes that for the average-performing vendor, statuses are assigned manually and usually at the supplier's company level. Ask every vendor, LightSource included, what the status attaches to.

Cost inside CM assemblies

A contract manufacturer's assembly price bundles purchased components, material, processing and margin. To see inside it, give every contract manufacturer the same structure. Full Breakdown asks each supplier for purchased items, raw materials, machine and assembly processes, packaging, logistics and markups in separate tables, so two quotes compare line by line.

On the buyer's side, a BOM is an item that contains other items, each line carrying a quantity and a cost from a manual entry, rollup, supplier quote or item contract. The cost breakdown chart divides the total by item, supplier or a custom property, and comparing two BOM revisions shows which lines changed in quantity, cost, source or supplier.

The detail is whatever the contract manufacturer enters, so require purchased-items detail in the RFQ message and have consigned components such as chips quoted separately. See should-cost analysis; LightSource accepts an uploaded should-cost as a baseline but has no modeling engine.

Early sourcing and the item master

To avoid a locked-in supplier, compete parts while the design can still move. That does not need a finished BOM: items can be created or ingested from drawings and sourced on their own, with a target cost and extra rounds on the same project. A supplier's new quote starts from its previous values, and earlier quotes stay in the history. See new product introduction and the convergence problem in dual sourcing.

For a 200,000-item master on SAP and a PLM, the documented path is to export the items as they are and load them with Item Sync, in the app or by script through the GraphQL API. Each item keeps the ID from your system, and re-syncing updates items by ID. When the same part appears under three numbers, AI duplicate detection flags likely pairs with a match percentage and reasoning, and a person merges each pair; the merged item takes over history, projects and BOMs, and the other is archived. That removes the cleanup project as a precondition but not the review. The documentation states no tested item count, so pilot with your own export. There is no prebuilt SAP or PLM connector; see integrations.

Vendors to consider

The ranked guide scores the options. The short version, with head-to-head pages in the comparison library:

  • LightSource. The AI-native direct materials operating system, spec through scale, PLM through ERP. It supports direct and strategic indirect sourcing and is not built for tactical indirect buying (three bids and a buy). It does not issue purchase orders or invoices and came out of stealth in 2025. The Hackett Group's Sourcing (for direct) Solutions guide lists it, which is a listing, not an endorsement.

  • JAGGAER. Hackett describes its roots as complex, regulated and research-intensive environments, including life sciences, and says JAGGAER ONE includes granular qualifications and supply quality management, within a suite built through several acquisitions, so test data flow between modules. See LightSource vs. JAGGAER.

  • Ivalua. An organically built suite for regulated enterprises that want deep configuration; buyers report that getting value from it takes data-model expertise. See LightSource vs. Ivalua.

  • SAP Ariba and Oracle. The natural tests for plants on SAP or Oracle ERP. A recurring minority complaint about Ariba is a dated interface for occasional users. See Ariba and Oracle.

  • GEP and Coupa. GEP is organically built with strong services and a should-cost module, which LightSource lacks as a built-in engine. Coupa is strongest in procure-to-pay and indirect spend. See GEP and Coupa.

  • Procurence and quality systems. Hackett describes Procurence as a supplier management platform for direct-materials qualification and performance monitoring. A PLM or eQMS holds the released record and quality file but is not a sourcing tool; decide which system owns the approved supplier list.

  • Excel and Outlook. Universal, with no revision tie. See LightSource vs. Excel.

Public proof

LightSource serves dozens of companies across the mid-market and the Fortune 500, including medical device and diagnostics companies; not every customer can be named. There is no published case study from a Class II or III device maker.

Hims, consumer health. Hims is a LightSource customer, a consumer health company and so an adjacent context rather than a device OEM.

Blue Bird, a school bus maker (adjacent industry). In the Blue Bird case study, RFQs per buyer grew from 34.9 to 48.3 (38 percent more with the same team), average sourcing cycle time fell from 16 to 14 days and 398 supplier companies were onboarded with 99.7 percent activated. It is not a device maker; the relevance is the move from email and spreadsheets to one system of record. See why Excel and email cost you money.

Sources

Frequently asked questions

Which sourcing software fits medical device manufacturers working under ISO 13485?

Look for software that keeps controlled drawing revisions, structured quotes and supplier documents together and says what it leaves to the quality system. LightSource does this with RFQs, RFIs and Data Rooms, but it is not a QMS and does not track quality agreements or document part-scoped supplier approval. The ranked guide compares the alternatives.

Is there supplier RFI software for ISO 13485 supplier qualification questionnaires?

LightSource has RFI templates with six question types, file submission for certificates, an NDA signed and uploaded by the supplier, reviewer approval or rejection and an Excel and ZIP export. It has no qualification status or expiry hold, so record the approval decision in your quality system.

What sourcing platforms do medical device OEMs use to see the component-level cost inside assemblies built by their contract manufacturers?

A platform that gives every contract manufacturer the same breakdown structure. LightSource's Full Breakdown format asks for purchased items, raw materials, processes, packaging, logistics and markups, and the buyer's BOM shows cost by item or supplier. The detail depends on what the contract manufacturer enters.

Which RFQ tools let a medical device sourcing team send suppliers the controlled drawing revision from the DMR and keep every quote tied to that revision?

In LightSource the drawing and specification sit on the item, and the revision freezes when sent to suppliers. Edits start a new revision, suppliers quote against the RFQ version they received, and the RFQ history keeps each version. The released record stays in your PLM or document system.

How do device makers run sourcing early enough in development that the DHF does not lock in the wrong supplier?

They compete critical parts while the design can still move and run supplier RFIs in parallel. LightSource supports this with projects started from items before a BOM exists, a target cost and repeat rounds, but does not know a program's design control status, so the NPI process sets the timing.

Which direct materials sourcing platforms work with a 200,000-item SAP and Windchill item master as it is, and quote against CM-built BOMs?

LightSource loads an exported item master through Item Sync (one Excel file up to 2 GB) or the GraphQL API, matches items by the ID from your system and flags likely duplicates for a person to merge. Contract manufacturers quote assemblies in Full Breakdown format. There is no prebuilt SAP or Windchill connector, so pilot with your own export.

Faster sourcing,
lower cost, less chaos.

See how LightSource connects engineering, procurement, and suppliers in one operating system to help you launch faster at lower cost.

DPW Award Winner

SOC 2

Hackett Group 2026 Validated

Kearney #1

Gartner Cool Vendor

Procuretech 100

G2 Top Rated